SAPPHIRE NITRO+ AMD Radeon RX 9070 XT GAMING OC 16G
Installment calculator
4,9%
interest
from 21.85 € monthly
SAPPHIRE NITRO+ AMD Radeon RX 9070 XT GAMING OC 16G
SAPPHIRE NITRO+ AMD Radeon RX 9070 XT GAMING OC 16G
The SAPPHIRE NITRO+ AMD Radeon RX 9070 XT GAMING OC 16G graphics card uses the AMD RDNA 4 architecture with a Navi 48 chip. The card has 16GB of GDDR6 memory clocked at 19500MHz and a 256-bit bus. The core runs at a base frequency of 2400MHz with a boost clock of up to 3060MHz. It connects via a PCI Express 5.0 x16 interface. The outputs include DisplayPort 2.1a and HDMI 2.1b, supporting up to 4 monitors simultaneously. The card supports AMD HYPR-RX with AFMF 2, AMD FidelityFX Super Resolution 4 with AI Upscaling, AMD Radiance Display Engine, and AMD Fluid Motion Frames 2 technologies.
GDDR6 / 16GB
Operating memory
PCIe 5.0 x16
Bus interface
1x 16-pin
Auxiliary power
RDNA 4.0
Chip architecture
750W
Recommended PSU wattage
Key features of the SAPPHIRE NITRO+ AMD Radeon RX 9070 XT GAMING OC 16G graphics card
- AMD RDNA 4.0 architecture with support for AMD FidelityFX Super Resolution 4 with AI upscaling and AMD HYPR-RX technology with AFMF 2
- Boost frequency up to 3060MHz and game frequency up to 2520MHz for top performance in the most demanding game titles
- 16GB of high-speed GDDR6 memory provides ample capacity for high-resolution gaming, ray tracing, and AI applications
- AMD Fluid Motion Frames 2 technology with AMD Radiance Display Engine and DisplayPort 2.1a output maximises game fluidity and visual quality
- TRI-X cooling with three AeroCurve fans with double ball bearings reduces noise by up to 10% compared to the previous generation
- Premium Honeywell PTM7950 thermal material with an integrated cooling module ensures direct contact with the GPU, memory, and VRM circuits, efficiently dissipating heat from all critical components
- Free Flow design with tunnelled fins increases convective airflow, and optimised composite heat pipes distribute heat evenly across the entire cooling module
Advanced Tri-X cooling system
Cooling is handled by the Tri-X system with three axial fans featuring AeroCurve blades, which reduce air resistance and increase the speed range while maintaining low noise levels. The fans are fitted with dual-ball bearings that have a lifespan 85 percent longer than sleeve bearings. The Free Flow design optimises airflow through the cooler's fins and minimises turbulence. An integrated cooling module ensures direct contact with the GPU, memory, and VRM circuits. Honeywell PTM7950 TIM serves as the thermal interface material, offering excellent thermal conductivity. The composite heatpipes are optimised for even heat distribution across the entire cooler. The fans can be easily replaced with a single screw, thanks to the Fan Quick Connect system.
Robust construction and durability
The card's design uses a cold-rolled steel frame that reinforces the shroud and wraps around the sides of the PCB. The MagniPlate magnetic reinforcement combines easy installation with ventilation and component protection. The FrameDefense system provides a sturdy frame construction that is resistant to mechanical damage during handling. The PCB is a 12-layer board with 2oz copper layers and a high TG rating for stability under high currents and temperatures. Fuse protection protects the card when connecting external power via the PCI-E connector. The STEALTH system for concealed power cable routing ensures a clean build appearance. The package includes an L-shaped card holder that prevents sagging and makes it easier to remove the card from the PCIe slot.
ARGB lighting and power management
The card is equipped with ARGB lighting on the shroud, which can be controlled via the TriXX software or synchronised with the motherboard's RGB system using a 3-pin connector. You can choose from various modes, including a rainbow effect, or turn the lighting off completely. Digital power control provides precise regulation and high efficiency for the power circuits. The VRM circuit cooling and separate thermal modules for the memory effectively dissipate heat from all sections of the card. The tunnelled fin design enhances convective airflow and ensures a continuous flow of air through the cooling system.
Technical specification
- Monitor connection: DisplayPort 2.1a, HDMI 2.1b
- Dimensions: 330.8 × 65.68 × 128.5mm
Stream like a pro
With the next-generation AMD Radiance Display™ engine and an improved Media Engine, you can enjoy professional-level recording and streaming like never before. Provide your community with enhanced visual quality when streaming and recording at lower bitrates, so you can focus on playing your best game.
High-quality streaming with AV1
Unlock new multimedia experiences with full AV1 encode/decode support, designed for incredible image quality at lower bitrates and smaller file sizes.
AMD noise suppression
AMD Noise Suppression uses artificial intelligence to help reduce ambient audio noise from your environment, providing greater clarity and focus whether you're on an important work call or immersed in a competitive game.
Create with your favourite tools
Bring your creativity to life with AMD Radeon™ RX 9000 series graphics cards in the most popular content creation applications. AMD Radeon™ graphics cards are designed to accelerate AI-enhanced features in many content creation applications, including Adobe® Creative Cloud, Blender®, DaVinci Resolve, Topaz Photo & Video AI and many more.
Specifications
Chip
Performance & usage
Memory
Frequency
Interface
Technology
Cooling system
Dimensions
Consumption
AI
| Code: | ELrx9070xn1 |
| Warranty: | 36 months |
| Links: | Producer's Website: |
| Manufacturer information |
24hour-AR, Van Nelleweg 1 3044 BC Rotterdam, The Netherlands [email protected] 
|