iGET SECURITY M3P16 - wireless controlled 230V socket for iGET M4 alarm

Wirelessly controlled 230V socket iGET SECURITY M3P16 is designed for iGET SECURITY M3 and M4 security system. It has a timer and on and off functions. It communicates with the iGET SECURITY app, through which several instructions can be instructed to the socket. The socket can thus be activated or deactivated depending on different situations, e.g. when an alarm is triggered, depending on the temperature or preset time. It can thus be used to switch on lights, heating, fans and many other appliances.

Use modes for M3 and M4 alarm:
Event - e.g. when an alarm or home mode is activated/deactivated, the socket is switched on/off, separately for each instruction
Accessories - if the accessory sends a signal, the socket is switched on/off
Timer - 4 time groups can be set with separate on/off times, including repeat settings - daily, weekly, exact date
Temperature - if it is less/greater than the set range, the socket will switch on/off (only for M3 alarm)
Example of use:
Turn off the light if there is an intrusion and raise an alarm to scare off the thief
Temperature switching, if the temperature drops below a certain level, the socket switches on the direct heater, once the temperature reaches the desired level, the socket switches off again and many more.
Technical specifications:
Broadcast frequency: 433.29 MHz
Signal range to the central unit: up to 200 m in direct visibility
Operating temperature: -20 to +50 °C
Operating humidity: 5-90 % (non-condensing)
Supply voltage: 220-250 V, 50-60 Hz, max. 10 A
Max. switching power for the connected device: 2500 W
Dimensions: 108 × 70 × 60 mm
Weight: 124 g