Name: SAVO Pool Chemicals Start Pack
Brand: SAVO
SKU: SAV001a13
Availability: Discontinued
Rating: 4.4 (2 reviews)

All from SAVO

10 ratings

Product accessories

SAVO Pool Chemicals Start Pack

SAVO Start Pack is a kit designed for versatile use in pool water to regulate pH, water disinfection and maintenance. The set includes SAVO Chlorshok, SAVO pH-, Maxi tablets, 3-in-1 complex, and universal pH measuring strips. Chlorococ is a granular preparation that rapidly increases the concentration of chlorine in pool water. SAVO pH- is designed for pH-lowering water whose value is reduced. The 3v1 complex then eliminates the proliferation of micro-organisms in water and effectively prevents permanent flocculation of impurities. SAVO Start pack is the perfect combination of products that keep your pool clean, at the right pH and without unwanted microorganisms.

Key features of SAVA Start Pack Pool Chemistry

Set of products for pH control, water disinfection and maintenance
The set contains SAVO Chlorshok, SAVO pH-, Maxi tablets 3v1 complex
Also included are universal pH measuring strips
Chlorchok increases the concentration of chlorine
SAVO pH - decreases pH
Maxi tablets 3v1 complex eliminates the proliferation of microorganisms
SAVO Start pack is suitable for indoor and outdoor pools
Designed for the treatment and maintenance of salt and fresh water

Dosage and use of SAVA pH-:
The dosage is always dependent on the actual pH and the total chemical composition of the water. Using SAVO pH - 10 g / m3 of water, the pH is reduced by approximately 0.1-0.2. Dissolve the preparation in a water container and then apply it to the pool. Leave the filter system switched on and after thorough mixing in the entire pool volume, perform a pH measurement and, if necessary, apply the product repeatedly. Always wear protective gloves and glasses when applying. Drop the preparation into prepared water and not vice versa. Never mix with other products. Store in a sealed container in a dry place and protected from direct sunlight at temperatures between 5 ° C and 25 ° C and out of reach of children. Do not eat any food or drink while working with the product.

Dosage and use of SAVA Chlorshok:
Before use, it is recommended to adjust the pH of the pool water to 7.1-7.5. It is important to use a test kit to measure active chlorine in pool water. The recommended dose is 7-22 g per m3 of water. After the swimming pool is filled with clean drinking water, there is a lower dose for maintenance after a downtime when there is no problem with water quality. On the contrary, use the upper limit of the dosage when using domestic hot water, a longer shutdown or a water quality problem. Dissolve the preparation in a water container and then apply it to the pool with the filter system switched on. In the case of application of a shock chlorine dose, there should be no persons in the pool.

Dosage and use of SAVA Maxi 3v1 tablet:
Before using, adjust the pH of the pool water to 7.1-7.5 (using SAVO pH + or SAVO pH -). It is necessary to use a test kit to measure active chlorine in pool water. Add 1 to 2 tablets every 20 to 30 m3 of water every 6 to 8 days, depending on the water temperature and the active chlorine content. The tablets are used to maintain a stable level of free chlorine at a satisfactory water quality, dissolve gradually and free chlorine breaks down. Use protective gloves and glasses when using, always dispense the preparation into prepared water and not vice versa. Never mix with other products. Store in a sealed container in a dry place and protected from direct sunlight at temperatures between 5 ° C and 25 ° C and out of reach of children. Do not eat or drink while working with the product.