Corsair HydroX XT Hardline Satin Transparent (3x1m 10/12mm ID/OD PMMA)
Price Guarantee
Corsair HydroX XT Hardline Satin Transparent (3x1m 10/12mm ID/OD PMMA)
The Corsair HydroX XT Hardline PMMA water cooling tubes form the basic building block for routing the liquid circuit in PC builds. They use transparent acrylic (PMMA), a material with high strength and dimensional stability. This construction effectively prevents deformation caused by pressure in the system or increased coolant temperature, which can reach up to 60°C. As a result, the tubes maintain precisely defined bends and straight lines without the risk of sagging. With an outer diameter of 12mm and an inner diameter of 10mm, they support optimal liquid flow and are fully compatible with the corresponding fittings. Their clear, yet matte, texture fully accentuates the flowing liquid and its colour.
Key Features of the Corsair HydroX XT Hardline PMMA 10/12mm Water Cooling Tubes (3x1m), Clear Matte
- The tubes are made of strong acrylic (PMMA)
- The surface has a transparent matte (Satin) finish
- The construction withstands coolant temperatures of up to 60°C
- Their dimensions support optimal liquid flow in the circuit
- The set provides enough material even for more extensive installations
- The length can be adjusted by cutting with a fine-toothed saw
Matte Finish of the Tubes
The transparent matte (Satin) finish gives these PMMA tubes a specific visual character that distinguishes them from standard glossy variants. The surface gently diffuses light from internal sources, thereby softening harsh reflections. The result is a softer, more diffuse illumination of the entire circuit. Moreover, the matte surface is less prone to visible fingerprints during installation. Despite this surface treatment, the material remains transparent enough to allow you to monitor the flow and colour of the coolant.
Adjusting the Length and Shape
The acrylic material of the Corsair XT Hardline tubes requires specific tools for modification. To achieve a clean cut, a fine-toothed saw must be used. After shortening to the desired length, it is essential to carefully chamfer and smooth the cut edges using a special tool (deburrer), which is key to creating a reliable and tight seal with the fitting. To create bends, the tubes are heated with a heat gun. The package contains three separate one-metre pieces, providing enough material for even more complex circuits in most computer cases.
Material:
PMMA
Outer Diameter:
12mm
Inner Diameter:
10mm
Maximum Operating Temperature:
60°C
Package Contents:
3× 1m
| Code: | UYhxxth3 |
| Warranty: | 24 months |
| Links: | Producer's Website: |