RODE VideoMic GO II

Do you need something to record or stream high-quality sound? The RODE Capacitor (electret) microphone will be the perfect thing. To achieve the desired effect from your new microphone, take care to choose the correct directional characteristic. The microphone is designed to capture sound coming from one direction. Sounds coming from anywhere else will be suppressed. The microphone is designed to be attached to a camera's hot shoe. This feature means you don't need another free hand or stand. The sensitivity of this microphone is around -31 dB. For reference, higher numbers mean a greater sensitivity. After you install this microphone in the desired position and location, all you need to do is connect it using 3,5mm Jack and USB-C. Thanks to this professional microphone from RODE VideoMic GO II, your recordings will be exponentially better.

RODE VideoMic GO II Microphone Key Features

• Microphone records sounds with professional-grade quality
• The design of this condenser Microphone is fantastic for studio purposes
• Microphone captures sound in the direction it is aimed while suppressing ambient noise
• Microphone can be attached to the hot shoe of your camera
• RODE microphone equipment: sprung holder (spider) and protection against wind
• Microphone records a frequency range of 20 to 20000 Hz
• Microphone can connect to the recording device via 3,5mm Jack and USB-C

Additional Features of the Microphone by RODE

The microphone is able to record frequencies between 20 to 20000 Hz. If you want to connect this microphone to an amplifier, take into account the impedance value of 2002 Ohm. The noise of the wind will not irk you. An effective cover that gets rid of this phenomenon, is included. If you need to save room, you'll be interested in its dimensions, which are 70 × 86 × 150 mm. The weight of the microphone is 89 g.