RODE NT55 Single
Price Guarantee
Installment calculator
4,9%
interest
from 6.16 € monthly
RODE NT55 Single
The NT55 is a versatile small-diaphragm condenser microphone designed for critical recording applications. Featuring a 1/2-inch gold-sputtered cardioid condenser capsule, it delivers a smooth, balanced sound with very low self-noise. For added flexibility, it includes a three-position pad (0, -10dB, -20dB) and a three-stage high-pass filter (flat, 75Hz, 150Hz), and comes supplied with an interchangeable NT45-O omnidirectional capsule. Its exceptionally accurate cardioid polar pattern and wide frequency response make the NT55 ideal for recording everything from acoustic instruments to drum overheads and cymbals, to live performances and on-location dialogue.
Handheld (to be clipped)
Microphone Type
Condenser
Microphone Principle
Directional
Polar Pattern
20–20,000Hz
Frequency Range
Key Features of the RODE NT55 Single Microphone
- Versatile small-diaphragm condenser microphone
- 1/2" gold-sputtered cardioid capsule for clear and balanced sound
- Very low self-noise
- Three-position PAD switch (0dB / -10dB / -20dB)
- Three-stage high-pass filter (Flat / 75Hz / 150Hz)
- Includes an interchangeable NT45-O omnidirectional capsule
- Accurate cardioid polar pattern
- Wide frequency response
- Ideal for acoustic instruments, drum overheads, and cymbals
Suitable for Musical Instruments
Technical Specifications
- Active Electronics: JFET impedance converter with bipolar output buffer
- Capsule: 0.50"
- Polar Pattern: cardioid, omnidirectional
- Frequency Range: 20Hz–20kHz
- Output Impedance: 100Ω
- Maximum SPL: 136dB SPL
- Maximum Output Level: 8.0mV (at 1kHz, 1% THD into 1kΩ load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV at 94dB SPL) +/- 2dB at 1kHz
- Equivalent Noise Level (A-Weighted): 15dBA
- Power Requirements: P48
- Output Connection: XLR
- Weight: 110g
- Dimensions: 20×20×145mm
Package Contents
- 1× RODE NT55 Single microphone
- 1× NT45-O interchangeable omnidirectional capsule
- 1× RM5 adjustable microphone clip
Microphone Principle
A dynamic microphone is suitable for open performances, live broadcasting, music production, etc. It uses a magnet and a moving coil to capture sound.
A condenser microphone is mainly used for studio purposes. It has higher sensitivity and lower noise. It must be powered separately.
Frequency Range
The frequency range indicates the span of frequencies that the microphone records. The wider the range, the more sounds it can capture.
Low frequencies (e.g. 20–200Hz): Bass, the lowest tones of instruments (double bass, kick drum) and male voices.
Mid frequencies (e.g. 200–3,000Hz): The body of instruments, the fundamental of the voice, where the ear is most sensitive, important for speech intelligibility.
High frequencies (e.g. 3,000–14,000Hz): Treble, details, sibilance and the "shine" of the sound.
Air band (above 14,000Hz): Gives recordings a feeling of expensive, super high-quality sound and space.
Sensitivity
Microphone sensitivity is the ratio of output voltage to acoustic pressure. It expresses how loud a signal the microphone produces at a given acoustic pressure; a higher sensitivity means a stronger voltage and is suitable for quiet studios, while a lower sensitivity is better for noisy environments as it is less likely to unnecessarily amplify ambient noise.
Specifications
Connection
Microphone characteristics
Power Supply
Features
Dimensions
Weight
| Code: | ROD006k1 |
| Warranty: | 24 months |
| Links: | Producer's Website: |