Ceresit Polyurethane Adhesive CT 84 Express Graphite

Ceresit CT 84 Express Graphite is a high-quality polyurethane adhesive designed for bonding both graphite EPS and XPS insulation boards. Thanks to its low-expansion formula, enhanced thermal insulation properties, and high homogeneity, it delivers excellent performance for both mounting and bonding. This foam is not only ideal for applying insulation materials but can also be used as a mounting adhesive for a wide range of other applications. With a yield of up to 15m² per 750ml, Ceresit CT 84 Express Graphite is an efficient choice that saves you both time and money – that's 100% more than traditional cement adhesives. Its adhesive strength is 15% greater than that of conventional cement adhesives, giving you the confidence of a strong and reliable bond. Furthermore, the adhesive creates a solid anchor after approximately 2 hours, which shortens the time needed to complete the job. Ceresit CT 84 Express Graphite is the ideal choice for fast, effective, and durable bonding of insulation materials.

How to use:
1. Shake the can vigorously for several seconds, remove the valve cap and screw the gun onto the can, holding it with the valve facing upwards. The gun's valve should be unscrewed; after screwing on the can, you can open the valve gun and release the adhesive by pressing the trigger. Before fixing the EPS, install the starter tracks.
2. When fixing insulation panels in an additive thermal insulation system, CT 84 should be applied around the perimeter of the board, about 2cm from the edge, and in one strip across the centre of the board, parallel to its longer side. When bonding insulation panels for foundation thermal insulation, apply CT 84 in 5 vertical strips parallel to the shorter sides of the board, approximately 2cm from the edge. 
3. Immediately press the board against the wall and hold it with light pressure using a long float. The smoothness of the EPS board surface can be adjusted for up to 20 minutes after fixing them, using a long trowel.