Corsair NAUTILUS 240 Black

Corsair NAUTILUS 240 Black
The Corsair NAUTILUS 240 liquid cooler is a complete, closed-loop AIO set that efficiently dissipates heat from your processor without unnecessary complications. It is built around a 240mm aluminium radiator with two 120mm RS120 fans. The entire system connects directly to your motherboard's headers, eliminating the need to install any additional software or external hardware controllers. The cooler focuses on pure performance and supports modern Intel 1700, 1851, and AMD AM4 and AM5 sockets.
Key features of the Corsair NAUTILUS 240 liquid cooler
- Zero RPM mode stops the fans under low loads
- The pump operates with a low noise level of 20dBA
- Daisy-chaining fans simplifies cable management
- The system connects directly to the motherboard without software
- Slightly convex copper base increases pressure on the processor
- Thermal paste is pre-applied at the factory
- Mounting kit supports Intel 1700, 1851 and AMD AM4, AM5 sockets
Quiet and efficient operation
Two RS120 fans with AirGuide technology concentrate the airflow, pushing it through the radiator fins with high static pressure. PWM control manages the speed from 420 to 2100RPM. Under low processor loads, the Zero RPM mode completely turns off the fans, contributing to quiet operation, which is complemented by the pump's 20dBA noise level.
Installation
The entire system is designed for simple installation. The cooler connects to standard 4-pin PWM headers on the motherboard. Daisy-chaining the fans contributes to clean cable routing inside the PC case. This method significantly simplifies cable management inside the case, as both fans are connected with one short cable, and then a single shared connector is attached to the motherboard.
Heat transfer on the AIO Corsair NAUTILUS 240
Efficient heat dissipation from the processor is ensured by a copper base with a slightly convex shape. This design increases the pressure on the centre of the CPU's heat spreader, where most of the heat is generated. This optimised contact promotes efficient heat transfer to the cooling liquid. Pre-applied thermal paste further speeds up the installation. The system supports Intel 1700, 1851 and AMD AM4, AM5 sockets.
Radiator:
240mm aluminium
Fans:
2× 120mm RS120
Connection method:
Directly to motherboard headers
Supported Intel sockets:
1700, 1851
Supported AMD sockets:
AM4, AM5
Fan speed range:
420 to 2100RPM
Pump noise level:
20dBA
Base plate material:
Copper with a slightly convex shape
Thermal paste:
Pre-applied from the factory
Specifications
Backlight
Fan speed
Technical specification
Socket
Dimensions
Weight
Radiator dimensions
Packaging
| Code: | DOna240b |
| Warranty: | 72 months |
| Links: | Producer's Website: |