Ubiquiti transceiver QSFP28, MM, 100G, SR4
Ubiquiti transceiver QSFP28, MM, 100G, SR4
The Ubiquiti 100G SR4 transceiver module connects network elements using optical cables. The optical module operates at a wavelength of 850nm for both transmitting and receiving. The device supports transfer speeds of 40 and 100Gbps, meeting the data transfer speed demands of enterprise environments. Its design uses the QSFP28 form factor for integration into compatible switches and routers. The module requires a power supply with a consumption of up to 2.5W, which contributes to the low energy consumption of the entire network node. The device operates within a temperature range of 0 to 70°C. The manufacturer has classified the product as a Class 1 Laser Product according to the IEC/EN 60825-1:2014 standard.
Key features of the Ubiquiti QSFP28, MM, 100G, SR4 transceiver module
- Supports high-speed transfers at 100Gbps
- QSFP28 interface and backwards compatible with the older QSFP+ standard
- MPO-12 Type B UPC connector for cable connection
- Signal transmission at an 850nm wavelength
- Power consumption of 2.5W
- Operates in a temperature range of 0 to 70°C
- Connection on OM4 fibre up to 100m long
Compatibility
The multi-mode transceiver is fully compatible with QSFP28 and older QSFP+ interfaces. This means you can plug the module into various types of network hardware without needing to change your existing infrastructure. The MPO-12 transceiver uses an MPO-12 Type B UPC connector to connect optical cables. This connector type helps maintain low signal attenuation and a stable connection under high load.
Optical signal range
The transmitter operates at a wavelength of 850nm and transmits data over multi-mode optical fibres. When using an OM4 standard optical cable, the connection works over a distance of up to 100m. With the older OM3 cable type, the supported distance drops to 70m. The package does not include the optical cable itself, which must be purchased separately according to the required route length.
Transfer speed:
100Gb/s
Output type:
Optical
Form Factor:
QSFP28
Connector:
MPO-12 Type B UPC
Transmit (TX) and receive (RX) wavelength:
850nm
Maximum power consumption:
2.5W
Operating temperature:
0 to 70°C
Safety warning:
CLASS 1 LASER PRODUCT, IEC/EN 60825-1:2014. Do not look into the ends of the fiber optic cable or SFP module while converters are powered.
Specifications
Features
Supported standards
| Code: | Ubiq25164 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected] 
|