Traxxas TRX-4M Land Rover Defender 1:18 RTR silver
Traxxas TRX-4M Land Rover Defender 1:18 RTR silver
Have a lot of fun with the smaller Traxxas TRX-4M Land Rover Defender RC car model that fits comfortably in your backpack and you'll have a lot of fun with it, whether at home, in the backyard or in the field. This top-quality model in compact 1:18 scale retains the excellent handling characteristics of the larger 1:10 models. With 4×4 drive and detailed licensed bodywork, you'll tackle all obstacles in style and play. Everything you need is included in the package, including a USB charger and a 7.4 V 750 mAh LiPo battery with a driving time of up to 60 minutes.
1:18
Scale
100 m
Transmission range
4 km/h
Maximum speed
Up to 60 minutes
Operation time
Indoor and outdoor
Retrieved from
Key features of RC car Traxxas TRX-4M Land Rover Defender 1:18 RTR, silver
- The model is completely assembled and ready to drive
- Licensed detailed Land Rover Defender body made of ABS
- Clampless body clamping
- LED lighting in the front bumper
- Metal chassis profiles
- 4-point axle suspension
- 4×4 drive, fixed differential, CV joints
- Front wheel steering 45° to both sides
- GTM oil shock absorbers
- 1" wheels with off-road tyres, hex 7 mm
- Powerful 180 87T DC motor
- Control unit with three driving modes, precision TQ transmitter
- Powerful servo steering with metal main wheel
- Battery and USB charger
- Waterproof electronics
- Travel time up to 60 min
Metal chassis frame, Trial suspension, 4×4 drive
The chassis is made up of two C-shaped steel profiles connected by plastic crossbars, thus ensuring a rigid structure minimising twisting. Heavier components such as the battery and motor are stored on the bottom of the chassis to keep the centre of gravity low. The TRX-4M uses a sophisticated 4-point fixed axle suspension with rugged tie rods and ball stud end caps. The 4×4 is driven by fixed differentials. For extremely smooth running, the front axle features CV joints.
Telescopic shafts, 45° turning angle
Telescopic centre drive shafts allow full suspension travel and are also fitted with CV idler joints. The 45° front wheel angle gives the model an exceptionally small turning radius and high manoeuvrability, suitable for indoor riding or trial runs over obstacles. Compared to other models of this size, the TRX-4M has a turning radius up to 50% smaller.
GTM oil shock absorbers, off-road wheels and tyres
The TRX-4M is equipped with GTM oil-filled shock absorbers for a smooth ride and realistic handling without. The shock absorbers absorb shocks and the ride is beautifully smooth without bouncing. The design of the 1" wheels and tyres is taken from the larger TRX models, but the high level of detail is maintained even with the smaller dimensions. Foam-lined tyres with a soft compound provide high traction. The hexagon is 7 mm.
Licensed bodywork
The body is made of ABS plastic, which is durable and allows for a high level of detail. The body also contains a mock-up of the spare wheel, canister, roof rack, snorkel, side mirrors, door handles, front grille and offset fender trims. LED lighting is installed in the front mudguard, which can be expanded with ProScale multifunctional lighting. Assembly and disassembly of the body is easy thanks to the ratchet system. Whether on the track or displayed on a shelf, the model will always look amazing. The sophisticated system of attaching the battery in the bulkhead with a rubber band is a small detail, but it will make battery replacement much easier and faster. In addition, the rubber belt fixes the battery firmly.
Powerful motor and control unit
The Titan 180 87T DC motor provides a wide range from low speed for technical riding to higher speeds for passing. The fixed interdental clearance is precisely defined and does not need adjustment. The new ECM-2.5 control unit integrates the controller and the receiver. The electronics are protected in a waterproof box. The following functions are included: LVD - LiPo battery under-discharge protection, easy one-button EZ-Set adjustment and 3 special riding modes. Power supply max. 2S LiPo. Powerful BEC with 6 V for servo. Precise and reliable control at 2.4 GHz. The unit is ready to connect ProScale lighting. Can be paired with TQi transmitters - basic settings only.
Recommended accessories
Everything for operation is included in the package, just add 4× AA batteries for the transmitter. It is recommended to charge the USB charger with a powerful USB power supply. For fast charging at full power and the ability to put the battery in Storage Mode (60% battery charge), which greatly extends battery life, it is recommended to purchase a Traxxas Universal Charger along with an iD charging port for interconnection. The iD charging port allows you to connect the Traxxas battery from the TRX-4M to the Traxxas EZ-Peak iD universal charger for all the same charging options and features as other Traxxas batteries. There is an integrated chip in the port connector that the Traxxas charger automatically detects and sets all the battery charging parameters for you. For the normal operation of a Traxxas RC car you need bolt glue, good quality tyre glue, silicone shock absorber oil and a set of screwdrivers.
Features and technical specifications
- Sport, trail and crawler riding modes
- Traxxas 2065T digital servo with DC drive
- New ECM-2.5 control unit
- 4×4 drive
- Car powered by Li-Pol battery
- Steering wheel control
- 4 AA batteries (not included)
- 2 driver channels
- Weight 483 g
- Chassis clearance 29 mm
- Dimension 27,9 × 12,4 × 13,5 cm
Package contents
- RC model Traxxas TRX-4M Land Rover Defender with installed components - DC motor Titan 180 87T, ECM-2.5 control unit, servo control 2065T
- Traxxas TQ transmitter
- Battery LiPo 7.4V 750 mAh
- USB charger
- Instructions and manual CZ, EN, DE, FR, SP
Specifications
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Colour
Dimensions
Included
Model power supply
Controller power supply
Battery
| Code: | HRAls229 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ASTRA, spol. s r.o., Prakšická 2589, 688 01 Uherský Brod, +420 572 619 619, [email protected] 
|