Axial SCX24 Ford Bronco 2021 1:24 4WD RTR blue
Axial SCX24 Ford Bronco 2021 1:24 4WD RTR blue
The 1:24 scale Axial SCX24 RC remote control car model with licensed Ford Bronco 2021 body and on licensed Nitto Trail Grappler tires with Factory Ford Wildtrak wheels with 4×4 drive is fully assembled and ready to drive. Everything you need is in the package. The model comes with an incredibly detailed licensed Ford Bronco body from the 2021 model year lineup. In addition to the front LED lighting, the body features a mock-up front grille, rear view mirrors, door handles, rear spare wheel and roof rack with accessories. For a perfect look, the windows are clear so you can see the interior with the driver figure. Realistic ABS plastic bodywork and large off-road wheels with superior ground clearance evoke the look of a world-famous car. At the heart of this is a powerful powertrain, consisting of a 180 engine with a multi-speed gearbox that delivers the necessary power to the axles. The torque is transmitted from the gearbox to the splined shafts and to the rigid axles via worm gears.
1:24
Scale
80 m
Transmission range
3 km/h
Maximum speed
Up to 50 minutes
Operation time
Indoor and outdoor
Retrieved from
Key features of RC car Axial SCX24 Ford Bronco 2021 1:24 4WD RTR, blue
- RC car Axial SCX24 is completely assembled and ready to use
- Everything you need is included in the package
- Realistic body design of the 2021 Ford Bronco with detailed features and LED lighting
- Licensed Nitto Trail Grappler M/T tyres with Wildtrak wheels
- Horizon control unit, motor and servo AS-1 installed
- 3-point front and 4-point rear suspension
- Metal chassis side frames and worm gear axles
- The hinged body is secured with only one clip
- Complete with ball bearings
- 4-channel transmitter 2.4 Ghz
- Remote-controlled LED front lights
- USB charger DYNC1063
Steel frame and powerful Tazer 180 engine for maximum off-road performance
Like the Axial SCX10 platform in 1:10 scale, the Axial SCX24 chassis has robust steel chassis frame rails with bracing to keep the chassis rigid enough for high axle twist. The Axial SCX24 RC model car is driven by a Tazer 180 series DC motor with 88 turns on the armature. The engine has the optimum torque needed for driving up steep gradients. It is mounted on a metal engine bed to help cool the engine and keep the temperature at an optimum level
Worm gears and robust suspension for maximum traction and stability
The front and rear differentials are equipped with worm gears, which give the axles very high torque, also providing braking function and, thanks to their small size, creating the extra ground clearance needed to tackle obstacles. The front and rear axle consists of a two-piece moulded composite solid axle. For optimum handling, the SCX24 is equipped with a 3-element front and 4-element rear suspension. When using worm gear differentials, torque is transmitted to the wheels by steel shafts which have high strength and rigidity when the wheels are engaged. The torque is transmitted by a pin on the hexagonal hubs. The front and rear drive shafts between the gearbox and the front and rear axles are splined shafts, which allow a large axial displacement and maximum torque transfer.
Functional shock absorbers, 4-element suspension and strong servo with gear protection
Even such a small RC car can have dummy shock absorbers with imitation auxiliary tanks. Despite the simple construction with coil spring and plastic body, the shock absorbers are perfectly functional. The rear suspension geometry uses a 4-link design that is optimized to reduce axle rotation and torque twist. The key component in expedition RC model cars is a sufficiently strong servo steering with a robust mechanism. Axial AS-1 steering servo with servo linkage is mounted directly above the front axle, which allows for precise steering while providing protection for the gears and servo electronics in the event of a steering obstruction or front wheel impact. The model is fully equipped with ball bearings in the gearbox, axles and drives. You can ride without worrying about a worn out plain bearing.
Licensed wheels and tyres, hinged bodywork and controllable LED lighting
Officially licensed Wildtrak wheels are molded in black and feature stunning mock-up details. Nitto Trail Grappler tyres offer a fantastic combination of off-road performance while maintaining excellent on-road properties. The hinged body system offers easy access to chassis components. The battery and chassis can be quickly accessed by removing just one body clip and flipping the body up. Two bright white LED lights are factory-installed in the front bumper to illuminate the area in front of the vehicle. The front lights on the model can be controlled remotely via transmitter (3. channel) and have the following functions - permanently lit, flashing or off
4-channel Horizon 2.4 GHz transmitter with status indication and complete control
The Horizon 2.4 GHz 4-channel transmitter has everything you need for operation. On the transmitter you will find the switches for the functions: steering and throttle trim, dual steering deflections, pairing, throttle and steering reversal. The 3-channel controller is a three-position controller. The transmitter also includes a mechanical switch for switching on. There are also three LEDs on the front panel that indicate: turning on the transmitter, pairing and battery charge status in the model. Indication of battery charge in the model: green - fully charged, yellow - half-charged battery, red - almost discharged battery and flashing red - discharged battery.
Horizon 4-channel controller with integrated controller and directional control
The Horizon control unit integrates a controller and receiver in one. Includes 4 channels and connectors for headlights and turn signals,the function of lights and turn signals is factory mixed to the third and fourth channel respectively (turn signals are not installed on the model, but can be added by the user). In the case of user completion of the direction indicators, they can be controlled remotely via the 4th channel of the transmitter and should have the following functions: off, flashing of the respective indicator lights when turning in a specific direction, warning lights, rapidly flashing warning lights. When completing the direction indicators, it is necessary to select the appropriate resistance according to the colour and type of LED. The left directionals plug into port CL-L2, the right into port CL-R3. The voltage on the ports is 5 V.
Accessories for normal operation
For normal operation of the Axial RC car you need tyre glue, bolt glue and a tool kit. The model also uses screws in inch units, so a 1/20" Allen screwdriver is recommended. Tyre adhesive is used to glue the tyres to the rim of the disc. It is always necessary that the tyre is firmly glued to the wheel rim around its entire circumference! If the tyre is not glued all the way around, the tyre may tear. The tyre adhesive has a special formulation that is able to bond materials such as rubber or nylon, while at the same time making the adhesive flexible once it has set. Robitronic Tire Glue is recommended. For routine maintenance, you need to glue the screws. Screws screwed into metal material (e.g. screws in the motor, bristles in the pinion) must be secured against loosening with this adhesive.
Features and technical specifications
- Steering and throttle trim settings
- Double steering deflections
- Reverse throttle and steering
- Remote light control (on/flashing/off)
- The possibility of adding turn signals and warning lights
- Battery status indication by LED
- Easy body hinging for battery access
- Additional functions can be controlled via 4 channels
- Adjustable shock absorber spring preload
- Wheelbase 132 mm
- Chassis clearance 27 mm
- Weight 268 g
- 4WD
- 180 88T DC motor
- Speed up to 3 km/h
- Horizon 2.4 GHz, 4-channel transmitter
- Receiver Horizon combo Rx/reg. with reverse
- Servo Axial AS-1
- Battery Dynamite LiPo 7.4 V 350 mAh
- Wildtrak discs
- Nitto Trail Grappler M/T tyres
- Package weight 1,069 kg
- Package dimensions 27.4 × 26.2 × 16.8 cm
Package contents
- In the package you will find a ready assembled RC model of Axial SCX24 Ford Bronco 2021 in 1:24 scale with installed components: Tazer 180 88T DC motor, receiver with integrated Horizon controller, AS-1 micro servo: SCX24
- Horizon 2.4 GHz transmitter
- LiPol battery Dynamite 350 mAh 2S 7.4 V
- USB LiPol charger
- 4× AA batteries
- Instructions for use CZ and manual EN, DE, FR, IT
Specifications
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Colour
Dimensions
Included
Model power supply
Controller power supply
Battery
| Code: | HRAls256 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Horizon Hobby GmbH, Hanskampring 9, D-22885 Barsbüttel, +49-40-822167800, [email protected] 
|