Axial SCX10 II Deadbolt 1:10 4WD RTR blue
Axial SCX10 II Deadbolt 1:10 4WD RTR blue
The Axial SCX10 II Deadbolt 1:10 4WD RTR RC car features a realistic and highly rigid SCX10 II chassis constructed from steel C-braces with transverse bracing for added rigidity. The moulded skid plate significantly reduces jamming and the simplified design makes maintenance quick and easy. There is also an adjustable body mount, adjustable bumper mounts with stabilizer attachment points and a servo bed for the optional 2 speed transmission and winch. The chassis with gearbox, axle brackets, bumpers, RC equipment, body and RC kit are installed between the steel frame stringers. The model reaches speeds of up to 5 km/h. Approximate driving time on a 7.4 V 5000 mAh LiPo battery is up to 2 hours.
1:10
Scale
300 m
Transmission range
5 km/h
Maximum speed
Up to 16 minutes
Operation time
Outdoor
Retrieved from
Key features of RC car Axial SCX10 II Deadbolt 1:10 4WD, RTR, blue
- RC kit Spektrum SLT2
- Very favourable price - bodywork did not need to be licensed
- The model is fully assembled and ready to go - just add the drive battery to the model and 4× AA batteries to the transmitter
- The SCX10 II chassis builds on the previous proven SCX10 chassis
- Battery compartment with adjustable stops accommodates different battery sizes
- Maximum attention to detail
- Battery compartment32 × 44 × 147 mm
Adjustable wheelbase and gearbox LCX AX10
The Axial Deadbolt SCX10 II RC car chassis has a factory wheelbase of 305 mm (12.0"), but can be easily adjusted to a wheelbase of 290 mm (11.4") or 313 mm (12.3") (interconnect kits sold separately). Axial has designed the chassis so that all wheelbase adjustment takes place at the rear without interfering with the front. The proven LCX AX10 gearbox features only 3 gears and a durable adjustable friction clutch. The gearbox is completely covered and allows a wide range of gear ratio changes - you can adjust the gear ratio for slow or fast driving.
Four-point rear suspension and AR 44 driveline
The rear axle suspension geometry uses a 4-element design that is optimized to reduce axle twist and torque steer. It also helps with steep climbs off elevation by having the correct anti-squat setting. The one-piece AR 44 front and rear axle features a molded beam for extreme durability. The gear is 6 mm above centre, which increases ground clearance and improves driveshaft angles. Metal shafts and internal helical gearing are standard and the drive train includes full ball bearings.
WB8 HD Wildboar shafts, adjustable shock absorbers, servo in the model chassis
The WB8 HD Wildboar front and rear driveshafts have a larger diameter cross pin (2×11 mm) for greater strength and longer life. Oil-filled shock absorbers have threaded bodies and a single coil spring. Damping level can be adjusted to suit track requirements. Realistic dampers with multiple mounting positions allow you to adjust the suspension for maximum performance. The servo is located in the chassis frame, not on the axle itself. The servo bed allows the use of a wide range of servos.
Method 307 Hole 1.9" wheels, Nitto Trail Grappler M/T 1.9" tyres and Spektrum S614 power steering
Officially licensed METHOD 307 Hole 1.9" wheels offer durability and a clean look. The discs are equipped with a dummy beadlock ring. The Nitto Trail Grappler M/T is a 4.7 × 1.9" (120 × 48 mm) tyre made from S30 compound. The tyres give the Axial SCX II Deadbold RC car sufficient ground clearance for off-road tracks. The large tread block offers excellent traction. The Spektrum S614 servo has a torque of 15 kg. cm, metal gears and waterproof construction.
Reliable RC control with Spektrum
The included Spektrum SLR 300 3-channel RC receiver has channels for throttle, steering and auxiliary functions. Connected ports can be used to power LED lighting or other accessories. Two-channel RC transmitter Spektrum SLT 2 operates in 2.4 GHz band with FHSS modulation. The transmitter is powered by 4× AA batteries. The receiver box located on the side plates allows easy access and reduces the center of gravity. Three silicone gaskets are included: one for the antenna, one for the servo wires (contains three slots for three channels) and one that acts as a seal for the box cover. Part of the RC model car Axial SCX II Deadbold is electronic controller Spektrum 40A.
Features and technical specifications
- The transmission can be adjusted for slow or fast driving
- The damping level can be adjusted to the requirements of the track
- Shock absorbers allow you to adjust the suspension for maximum performance
- Frequency 2.4 GHz
- Li-Pol battery
- RC transmitter Spektrum SLT 2
- RC receiver Spektrum SLR 300
- 4× AA batteries for transmitter
- Weight2100 g
- Dimension 22,9 × 22,5 × 46 cm
Package contents
- RC car model Axial SCX10 II Deadbolt 4WD
- Dynamite 540 35 T DC motor
- DC regulator Spektrum 40 A
- Servo control Spektrum S 614
- RC transmitter Spektrum SLT 2
- RC receiver Spektrum SLR 300
- 4× AA batteries
- Plastic parts
- Instructions CZ, EN, DE, FR, IT
Specifications
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Colour
Dimensions
Model power supply
Controller power supply
Battery
| Code: | HRAls247 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Horizon Hobby GmbH, Hanskampring 9, D-22885 Barsbüttel, +49-40-822167800, [email protected] 
|