Axial Capra 1:18 V2 4WD RTR black
Axial Capra 1:18 V2 4WD RTR black
The Axial Capra V2 4WD RTR RC car brings you the ultimate off-road driving experience, in 1:18 scale thanks to its proven Capra tubular chassis design with a realistic look, portal axles for maximum ground clearance, 4-point axle suspension, LED headlights and light bar. It features a lowered tubular chassis and portal axles that add extra ground clearance for greater manoeuvrability when driving over obstacles. For reliable steering, a powerful S651 servo is mounted, which is also used in 1:10 scale cars. The off-road 4-point suspension allows the UTB18 Capra to go everywhere that would be impossible with conventional axles.
1:18
Scale
50m
Transmission range
4 km/h
Maximum speed
Up to 30 minutes
Operation time
Indoor and outdoor
Retrieved from
Key features RC car Axial Capra 1:18 V2 4WD RTR, black
- Fully operational - everything you need is included
- 4-point suspension geometry for optimal climbing ability
- Stainless steel lower links and metal axle components
- 1:10 scale servo steering on the axle for sure and strong handling
- Officially licensed Nitto Trail Grappler M/T tyres on Raceline Monster wheels
- Realistic interior with helmeted driver and passenger figures
- High quality electronics and RC kit Spektrum SLT2
- Battery compartment is 58 × 33 × 21 mm
Durable, powerful and ready for any terrain
Officially licensed Nitto Trail Grappler M/T tires are mounted on licensed Raceline Monster wheels. They are great and give the UTB18 Capra the ability to down rock trails, rough dirt roads and most off-road surfaces. Licensed body panels, helmeted driver and passenger figures, LED lights and more create a realistic look that looks great.
Use of portal axles with 4-point suspension
Portal axles are an unconventional feature for mini cars, but now the UTB18 Capra 1:18 brings a groundbreaking portal axle design to this scale that increases ground clearance at the differential point and provides the best ground clearance. Axial tuned the suspension geometry of the UTB18 Capra 4WD Unlimited Trail Buggy to deliver the best possible performance. The Capra also has a specially shaped lower chassis that allows it to slide smoothly sideways when in contact with terrain and not get caught on an obstacle.
Capra tubular frame and low-profile servo steering
Reproducing the proven 1:10 Capra tubular chassis design to 1:18 scale, the Axial UTB18 Capra offers the same realistic trail buggy look as well as optimal tracking over rough terrain. As with most crawler chassis, the UTB18 Capra 4WD Unlimited Trail Buggy has a servo mounted on the front axle, which contributes to a lower center of gravity and allows for better control of full-range steering.
Metal front, rear semi-axles and LED headlights, light bar and rock lights
The front drive shafts with cardan shafts can be rotated by up to 45°. The drive components are made of high-strength steel, so they can withstand even extreme loads and steer safely and smoothly in any situation. Axial enhances the realism of the 1:18 scale RC model UTB18 Capra 4WD with functional LED headlights, light bar and forward-facing Rock lights for driving after sunset.
Features and technical specifications
- Frequency 2.4 GHz
- Transmitter Spektrum SLT2
- SLT receiver
- Spektrum 7.4 V / 650 mAh LiPol battery; 2S 30C IC2 Smart G2
- 4× AA batteries
- Weight 842 g
- Dimension 15 × 19.6 × 32 cm
Package contents
- RC car model Axial UTB18 Capra 4WD RTR
- DC motor Tazer 380 37T
- Spektrum 25A 2-in-1 control unit
- SLT receiver
- Spectrum Servo S651 7 kg-MG Transmitter
- Spectrum SLT2
- Spektrum 7.4 V / 650 mAh LiPol battery; 2S 30C IC2 Smart G2
- USB-C LiPo G2 Smart S10 IC2 charger
- 4× AA batteries
- Instructions CZ, EN, DE, FR, IT
Specifications
Battery
Age and intended use
RC model type
Scale
Features
Advanced
Control type
Colour
Dimensions
Included
Model power supply
Controller power supply
| Code: | Hraeb069 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Horizon Hobby GmbH, Hanskampring 9, D-22885 Barsbüttel, +49-40-822167800, [email protected] 
|