Fencing Pocket Handle Ruice P801-SF and Fenix Powerful UC30 XP-L EDC Rechargeable Torch are the ideal combination for a trip to nature. The knife has a grip made of 3Cr14N stainless steel in a sanded finish. The blade made of sandvik 14C28N steel with a strength of 58 - 60 HRC is 86 mm long. Thanks to the flipper, you can quickly open it and the Frame Lock fuse will ensure that it does not accidentally close. The Ruike P801-SF knife weighs only 120 grams and is fitted with a steel clip for belt attachment. The Fenix flashlight will then offer a lumen flux of up to 1000 lumens and a fair sweep up to 253 meters. This torch model uses state-of-the-art LED Cree XP-L HI in daylight (5500-6500 K) with 50000 hours of life. Lamp power is provided by a 2600 mAh Li-Ion battery with a capacity of 2600 mAh and charging via a micro-USB connector built into the flashlight.
The Ruike P801-SF closure knife meets the highest demands on professional knives thanks to the materials used and the first-class processing. The knife blade is hard and corrosion resistant, so you can take it with you and under any conditions. Thanks to the flipper, open the Ruike P801-SF knife quickly and easily . Once opened, it serves as a shield.The Ruike P801-SF knife overlays the Frame lock to prevent unwanted opening, so your safety is taken care of. Frame lock has all the advantages of a padlock, but with the difference that it is much stronger.
If you like going out for nature trips that often stretch down to darkness, you should definitely not miss a good quality lantern. The Fenix UC30 is an indispensable helper for camping and a variety of outdoor activities. Of course, the battery is included in the package, making it easy to get the flashlight right after you buy it. Alternatively, the UC30 can be powered by two CR123A disposable lithium batteries. This is useful when you are out of range for a long time. The lamp promises up to 150 hours of stamina depending on the mode selected. Depending on the situation, you can choose from six power modes including stroboscopic flashes for emergency situations. The UC30 is the ideal ratio of size, favorable price and high performance.
The Fenix UC30 is intuitive and very comfortable with a stainless steel side button with indicator light. Turn the switch on and off by holding down the button for about half a second. Then you just switch the light mode by briefly pressing the button. To switch to flash mode, hold the side button for approximately 1 second. If you want to check the battery charge status, briefly press the button when the lamp is off. This activates the LED indicator in the button. If the LED is green, the battery is over 85%. Green blinking indicates that the battery capacity is somewhere between 50 and 85%. If it is red, the battery is charged at 25-50% and red blinking means less than 25% of the battery capacity. To charge you just need a conventional micro USB cable that you plug directly into the flashlight . The fully discharged Li-ion battery is charged in about 3 hours. Fenix also remembers safety, so the UC30 has provided protection against overheating. At the same time, the torch saves the battery because, after 3 minutes of operation in the highest mode, 1000 lumens switch itself to 350 lumens.
| Code: | SPT0005set |
| Links: | Producer's Website: |