Ledlenser P3 Core
Ledlenser P3 Core
The LEDLENSER P3 CORE is an ultra-compact flashlight with intuitive control via a switch in the end section. With IP54 protection, it is also suitable for harsh conditions. The clip makes it easy to attach to your pocket or belt and be always at hand. It offers fast light cone focusing with Advanced Focus System technology. With a luminous intensity of 90 lm, the light reaches a distance of 110 m and lasts for 3 hours. At an intensity of 50 lm it reaches up to 70 m for 40 hours and at an intensity of 15 lm it shines up to 40 m for 6 hours.
Key features of the Ledlenser P3 Core flashlight
- Ledlenser P series flashlight with CORE marking for everyday use
- Dust and splash proof (IP54)
- Clip for easy attachment to pocket or belt
- Fast focusing of the light cone thanks to Advanced Focus System technology
- Power up to 90 lm, range up to 110 m, up to 40 hours (depending on mode)
- Three levels of lighting
Advanced Focus System
The combination of the lens and the reflector has created a unique technology, specifically the reflector lens, which enables the focusing of a beam of light with a smooth transition from a wide homogeneous circle of light to a sharp beam and vice versa. Focusing is done by simply moving the flashlight head forward (focus) or backward (defocus). The LEDLENSER flashlight uses the principle of light refraction. Conventional flashlights only reflect light from reflective surfaces inside the head of the flashlight.
Gold plated contacts
Gold is a very special material. It is an excellent electrical conductor and is extremely durable. Its durability lies in its ability to resist corrosion and its high degree of chemical resistance. It is estimated that approximately 70% of flashlight failures can be attributed to corrosive damage caused by acid or battery gas. That is why the LEDLENSER flashlight has gold-plated contacts. Lamp materials also vary in their electrical conductivity. At high load, some conductors heat up and due to this the resistance in such material increases, the voltage decreases and the energy flowing through is converted into heat, which is desirable in an electric heater, but in lamps it is exactly the opposite. The energy supplied from the batteries must not heat the contacts but be supplied to the LED. Thanks to the gold-plated contacts, the LEDLENSER's electronics will last for decades.
Batteries:
1× Micro (AAA) Alkaline 1.5 V
CRI (colour rendering index):
70
Light temperature:
6000-7500 K
Fall test from a height:
2 m
Package contents:
Batteries, pocket clip
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
| Code: | SPTled62 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Ledlenser GMBH AND CO. KG., KRONEN STRASSE 5-7, SOLINGEN, 42699, GERMANY, +49 212 5948 0 
|