Jurek Attack 2.5 XL
Jurek Attack 2.5 XL
The practical, extended ATAK 2.5 XL tent is ideal for year-round, frequent use by 2 to 3 people. This is a double-skin tent with a single entrance. The inner tent is permanently attached to the groundsheet and separated from the outer tent by a 6cm gap, which can be adjusted as needed. This gap improves the tent's ventilation and thermal comfort. For quality ventilation, the inner part of the tent is equipped with a top opening covered with a fine mesh and 2 external ventilation dormers. The entrance is protected against pesky insects by a fine mosquito net. The outer tent creates a small vestibule that can be used for storing gear.
3
Capacity
5000mm / 10000mm
Water column flysheet / groundsheet
120 × 160 × 320cm
Tent dimensions (H × W × D)
Double-skin
Number of skins
3.2kg
Weight
Key Features of the Jurek ATAK 2.5 XL Tent
- Tent for 2 to 3 people
- Year-round use
- Single entrance
- Durable materials for frequent use
- RIPSTOP technology to prevent mechanical damage
- Resistant to UV radiation
- High-quality ventilation system in the ATAK 2.5 XL
- Waterproof up to a 5,000mm water column
- Vestibule for gear storage
- Fine mosquito net in the inner tent
High-Quality and Durable Materials of the Jurek Outdoor Series Tents
The tent groundsheet is made of polyester fabric treated with impermeable PU coatings and silicone, making it waterproof up to a 10,000mm water column and dimensionally stable. The outer tent is made from a polyester RIPSTOP fabric with water resistance up to a 5,000mm water column. The fabric is also treated with silicone and PU coatings and is resistant to UV radiation. The inner tent material is a breathable polyester RIPSTOP fabric with a hydrophobic treatment. The RIPSTOP finish is achieved through a special weaving technique. The fabric is highly resistant to mechanical damage, and if a tear occurs, it prevents it from spreading.
Comfortable Stays on Your Travels
The inner tent is firmly attached to the floor. It is suspended from the structural poles using tension cords and hooks. At the top of the inner tent, there is a ventilation opening covered with a fine mesh. The entrance of the inner tent also features a fine mesh mosquito net for more intensive ventilation and protection against pesky insects. The outer tent (flysheet) is stretched over the structure and is attached at the ends of the poles at the bottom. In front of the inner tent entrance, the flysheet is extended to create a small vestibule for storing gear. Guy lines on the edges and in the middle of the flysheet sides are used for anchoring. At the top, there are two covered ventilation sleeves. There is a gap of about 6cm between the walls of the inner and outer tents, which improves thermal comfort, ventilation, and reduces condensation.
Additional Information
- Groundsheet – Polyester fabric with impermeable PU coatings and a silicone finish
- Flysheet – Polyester RIPSTOP fabric with polyurethane (PU) impermeable coatings and a silicone finish
- Inner tent – Breathable polyester RIPSTOP fabric with a hydrophobic finish
- Pegs – Duralumin needle pegs, 6mm diameter
- Zips – Coil zips
- Structure – Duralumin poles 7075-T9
- Pole connection – A bundle of elastic cords with a polyamide sheath (inside the structure)
Accessories
- 1× inner tent and flysheet
- 11× tent pegs
- 2× long duralumin poles ⌀ 9.5mm
- 7× guy lines, 2m long
- 4× guy lines, 1m long
- 1× carry bag
- 1× repair kit (self-adhesive patch and a 12cm duralumin tube)
Waterproof Rating (Hydrostatic Head)
Indicates the resistance of the fabric and seams to water penetration. It specifies the amount of water the material can hold before it starts to leak. The higher the value in mm, the more resistant the tent is. Every tent should have a flysheet with a waterproof rating of at least 2,000mm, which is approximately the pressure exerted by a raindrop travelling at 80–90 km/h. To survive a storm unscathed, a waterproof rating of at least 3,000mm is a safer bet. For the groundsheet, a waterproof rating of 5,000mm is recommended for general hiking. For more demanding conditions, choose a groundsheet with a waterproof rating of 8,000–10,000mm.Specifications
Type
Tent pitching
Features
Unpacked dimensions
Packed dimensions
Accessories
| Code: | SPTjur3530 |
| Warranty: | 24 months |
| Manufacturer information |
JUREK S+R s.r.o., Kunčice pod Ondřejníkem č.p. 766, 73913 Czech Republic, +420 556 850 032, [email protected], www.jurek.cz 
|