SECTRON Portable charger 32 A, 400 V, CEE 5pin - Type 2, 7 m

With the help of the power cable, the SECTRON portable charger for electric cars - 32 A, 400 V, CEE 5pin - Type 2, length 7 m can be used to charge electric cars that have a Type 2 connector. The cable is 7 m long. It reaches a maximum charging power of 22 kW, the maximum current is 32 A and charging takes place at a voltage of 400 V. The SECTRON power cable uses 3 phases. The cable is made of high-quality copper with excellent conductive properties. The TPE cable insulation material is soft and has high strength. The IP65 protection rating (meets IEC62752 CE standards) ensures resistance to splash water, which means it allows the charger to be used outdoors. The portable charging station is also suitable as a home charger for a hybrid. Thanks to its compact size, the portable charging station can travel with you everywhere in the trunk of your electric car. And at your destination, all you need is a three-phase 5-pin red 400 V 32 A socket (CEE 5-pin 400 V 32 A).

Delayed start of charging

The SECTRON portable charging station is equipped with a delayed charging start function, thanks to which you can delay the start of charging according to the current household/company consumption or according to the low/high tariff and take advantage of cheaper low tariff rates or influence the time when your vehicle ends charging. The charging current can be adjusted according to the available power and car type.

Electricity meter with memory function

The SECTRON portable charging station has a built-in electricity meter with memory that displays the electricity consumption each time the car is charged. The information can serve as a basis for reimbursement for charging a company vehicle from a private electrical connection. Individual charging cycles and transferred energy values can be displayed in the menu and can also be deleted at any time. The portable charging station remembers the value of the energy transferred to the vehicle battery and this value remains stored even after disconnection from the network until reset by the user (up to a maximum value of 999.99 kW). h). In the event of a power outage, charging will continue after power is restored.

Power settings

The maximum current limitation function is used to adjust the charging power of the SECTRON portable charging station. After connecting the portable charger to the mains , the default value of 16 A is displayed on the left side of the display, which can be changed in steps of 6 to 16 A using the AMPS button . In places with insufficient power from the distribution network, circuit breaker limitations, or if multiple appliances are connected to a given circuit breaker at the same time, it is advisable to reduce the maximum current drawn.

Portable charging station with CE certification and Type 2 IEC62196 compatibility

The SECTRON portable charging station has been carefully tested and, based on tests carried out by certified laboratories and certificates supplied by component manufacturers, the charger complies with the standards and directives and meets European safety standards. Its use is completely safe if you follow the instructions for use according to the user manual. The CE marking placed on the product indicates the product' s compliance with binding European technical and legislative regulations and standards. The SECTRON AC CHARGER portable charging station is compatible with electric vehicle types that have a Type 2 socket that meets the European standard IEC62196. This connector is the standard connector for all electric cars sold in the EU.

Package contents:
Portable charging station, wall mount bracket, carrying case
Technical specifications:
Cable: 5 x 6.0 mm² + 1 x 0.75 mm²
Charging cable length: 7m
Input: 230/400 V, 50 Hz, 6 A–32 A (3 phases)
Output: 230/400 V, 50 Hz, 6 A–32 A (3 phases)
Charging power range (AC): 4.2–22kW
Vehicle connector: Type 2 IEC62196-2 Female plug (DSIEC2e-EV32P)
Socket connector: CEE 400 V 32 A 5 pin
Residual current circuit breaker: RCD IΔN AC = 30 mA, IΔN DC = 6 mA
Rubber connector cap
Operating temperature: –25°C to 50°C
Weight: 6,3 kg
Dimensions: 29 × 9 cm
Standards: EN 61851-1:2019, EN 62752:2016 + A1:2020, ČSN EN 61000-6-4:2007 + A1:2011, EN 61000-6-2:2005, EN 61000-3-11:2000, EN 61000-3-12:2011, RoHS
Coverage: IP65 (meeting IEC62752 CE standards)
Current limit setting: 6–32 A (steps)
Setting the delayed charging start: after 1 hour, max. 9 hours
Warning:
Attention: To use the 22 kW/32 A portable charging station at maximum power, it is necessary to have a minimum fuse in the main switchboard of 40 A. For an 11 kW/16 A charger, a minimum 20 A circuit breaker is required in the main house switchboard.