SCYTHE SCVSG-1000 Setsugen

Attractive graphics card cooler Scythe Setsugen.The cooler is made up of large passive components to which it is allocating fan.Cooler using heatpipe technology, which are copper.The cooler is compatible with many modern graphics cards.The radiator is rich bundled accessories, which includes a lot of liabilities in mind, mounting clips, teplovodivou label and manual.Fan speed can be regulated knob, which is led at the slot on the back of your computer.Cooler can be used purely as a fan-less passive (less powerful card).
Heatpipe technology is based on the closed tube, where the "warm" end is a liquid with low boiling point, which heating begins to evaporate and the vapor phase increases the "cold" end where it condenses on the walls and the tube is returned in a liquid state back.When heating the liquid, the waste heat from the chip is used to change state and then in the form of hot steam goes to the opposite end, which must be cooled to a temperature at which vapor condenses.Compared to classical convention has therefore higher efficiency heatpipe technology, heat transfer, but only if sufficient temperature difference between the two ends of the tube and its correct orientation.
Parameters and specifications:
Compatible graphics cards:
ATI:Radeon 9 ***/X ***/X1300/X1600/X1650/X1800/X1900/X1950/HD2600/HD2900XT/HD3650/HD3850/HD3870/HD4770/HD4830/HD4850/HD4870/HD4890/HD 5850/HD 5870
NVIDIA:Geforce FX5900/6600/6800/7300/7600/7800/7900/8500/8600/8800GTS (G92)/8800 GT (G92) 8800 (G80)/9600 GT/9600 GSO/9800 GT/9800 GTX/9800 GTX +/GTS 250/GTX 260/GTX 275/GTX 280/GTX 285
Incompatible with the Radeon HD 5770 and 5750
Heatpipe:
Number:4
Material:Copper
Fans:
Number:1
Dimensions:100 x 100 x 12 mm
Speed:800 (± 30%) ~ 2000 rpm (± 10%)
Noise19.53 ~ 33.67 dBA
Airflow:19.40 ~ 45.47 CFM
Supplied fan:Scythe Slip Stream 120 mm SLIM with speed control
Other parameters and functions:
Rich accessories (liabilities in mind, etc.)
Dimensions:
180 x 33.5 x 139 mm
Weight: