AXAGON ADE-XA

The compact AXAGO ADE-XA external network card easily transforms the USB 2.0 port of your PC into a Fast Ethernet 10/100Mb port. In addition to its high compatibility, it offers advanced features including an IPv4/IPv6 checksum engine to reduce CPU load checksums, crossover detection and auto-correction, and support for Wake-on-LAN modes.

Thanks to its simple installation, this USB-Ethernet adapter easily gives your device a network connection, adds a missing RJ-45 network connector, adds an additional network card or replaces the original network connection. Since it supports all current versions of Windows, Mac OS X, Linux and Android OS, it can be used with almost any desktop, notebook, ultrabook or tablet.

Input Interface:
1x USB 2.0 (backward compatible with USB 1.1)

Ports:
1x RJ45 LAN port

Bit Rate:
10/100 Mb/sec

Properties:
Fully compatible with USB 2.0 and backward compatible with USB 1.1.
Supports 1.5/12/480 Mbit/sec (low/ full/high speed) bit rates.
Full support for Plug and Play and Hot Plug.
USB 2.0 port with a male-male connector and an 8cm long fixed cable.
RJ-45 connector for UTP or STP connection.
Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX specifications.
Supported bit rates 10/100 Mbps, Ethernet Interface.
10/100 Mb/sec autodetection.
Supports an IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU load including IPv4 IP/ TCP/UDP/ICMP/IGMP &IPv6 TCP/ UDP/ICMPv6 checksum and checksum generation.
Support 2 VLAN ID filtering.
Supports full duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-flow flow control.
Auto MDI/MDIX support - Crossover detection and autocorrelation eliminates the need for crossover cables.

Wake-on-LAN Features and Advanced Power Management Features:?
Sleep and Wakeup support via Magic Packet, Microsoft Wakeup Frame and Link Status Change.
Support for Power Management offload (ARP & NS).
Dynamic power management support to reduce standby or lighten traffic on the network.

More information:
Adapter power supply via bus (bus power) - No additional power required.
Two LEDs for activity, network and power indication.
Dimensions 60 x 20 x 19mm, USB cable length 8cm, weight including USB cable 20g.
Used ASIX AX88772B chipset.

Supported opreration systems:
MS Windows 8.1/8/7/Vista/XP/Server 2012/Server 2008/Server 2003 (all 32- and 64-bit versions of Windows OS supported), Mac OS X 10.5 and later, Linux 2.6.X and higher, Windows CE 7.0/CE 6.0, Android (WARNING - check with the Android device manufacturer if the Ethernet connection option is supported).

Package contains:
USB - Ethernet adapter, driver CD and printed installation instructions in English, Czech, Slovak and Polish.