Reliable dual motherboard equipped with a chipset NVIDIA nForce Professional 2200, fully supports 64-bit applications and it offers significantly higher performance.It is intended for two AMD Opteron processors with a cap Socket F.Eight memory slots allowing the installation of up to 32 GB DDR2 Registered ECC memory, thereby significantly increasing the storage capacity for server systems.Also offers flexible options for extending thanks to a PCI Express slot, one classical PCI slot, one HTX slot (with support rozšiření card QLogic Hyper-Transport), and finally one SO-DIMM slot for server management.
The board is an integrated video card ATI ES1000 PCI with 32 MB of RAM and two gigabitové network card Broadcom.Two USB ports are led out on the back of the board, two more may be out of the header on the motherboard.To connect hard drives are available two channels Ultra DMA 133/100 and four Serial ATA ports with RAID 0, 1, 0 +1, 5, JBOD, giving a total of up to eight devices.
The parameters and specifications:
Applicable processors:
2 x Socket M processors for AMD Opteron DualCore
Processors with a frequency of up to 3 GHz
Čipset:
NVIDIA nForce Pro 2200
The system bus:
Up to 1 GHz
RAM:
Slots:8 slots for memory modules DDR2 667 MHz
Suitable type of memory:Registered ECC modules only with Parity
Capacity:Each module 512 MB to 2 GB
The maximum amount of memory:up to 32 GB DDR2
Dual channel:two identical memory modules into a single bank
Kingston memory is recommended for their excellent reliability and perfect compatibility.Information on Kingston memory modules appropriate for the board, see/ / www.ec.yogi.com / ecom / configurator_new / modelsinfo.asp?SysID = 32348 & mfr = ASUS & model = KFN4 & root = us & LinkBack = http% 3A% 2F% 2Fwww.yogi.com & Sys = 32348-ASUS-KFN4-DRE + Motherboard & distributor = 0 & submit1 = Search "> here.
Extension slots:
1 x PCI Express x16
1 x PCI 32-bit 33 MHz
1 x HTX slot
1 x SO-DIMM slot for ASMB3-SOL
Integrated video card:
ATI PCI ES1000 with 32 MB of RAM
Controllers discs:
2 x Ultra DMA 133/100 (max4 devices)
4 x Serial ATA with RAID 0, 1, 0 +1, 5, JBOD (max.4 devices)
Integrated network card:
2 x 10/100/1000Mbps (chip Broadcom BCM5721)
Connectors on the rear panel:
1 x serial port
1 x PS / 2 keyboard
1 x PS / 2 mouse
1 x VGA
2 x USB (the possibility of adding further to bracketu)
2 x RJ-45
Power:
SSI
Connectors:1 x SSI 24 pins, 1 x SSI 12-4-pin
For the correct functionality is necessary server cabinet with a good source!
The size of plates:
305 x 330 mm E-ATX