Palsar7 LED treatment mask for face and neck (ROSEGOLD)

How photon therapy works

In this therapy, light enters the body as a stream of energy in the form of photons. Different wavelengths of light also have different positive effects on your skin care. LED Mask PALSAR7 ROSEGOLD is equipped with LEDs covered in transparent capsules. The face mask is equipped with 138 and the neck mask with 54 LEDs. These diodes produce photons with different wavelengths in the range from 390 to 760 nm, each diode has a defined power and luminous flux value. These are 7 healing lights: 4× basic - red, yellow, green and blue + 3× combined - purple (pink), green-blue, white and strobe mode. Each of them has very specific effects and you choose what skin problem you need to solve at the moment and therefore what light you will use during the therapy.

PALSAR7 ROSEGOLD LED face and neck mask will also provide your skin with an effective massage

Around the eye holes of the face mask are soft grey rubber pads that will protect your eye area from unpleasant blisters. The PALSAR7 ROSEGOLD LED treatment mask includes seven galvanic electrodes (microelectronic massage " sensors" ), which must be attached to the mask before first use. Massage "buttons" help minimize wrinkles and fine lines, promote blood circulation. The intensity of the microelectronic treatment can be set on the remote control (so-called. GALVANIC MODE). Before putting on the mask, reduce the intensity to a minimum. Too high an intensity can have similar symptoms to an electric shock. The LEDs in the masks do not need to be replaced.

The healing effects of the individual colours of the lights of the LED face and neck mask PALSAR7

470nm LED Blue Light – Anti-Acne:
Effectively reduces the appearance and treats acne, improves skin condition, without leaving scars, activates porphyrins (starts a chemical reaction, which kills harmful bacteria), has an antibacterial and anti-inflammatory effect.
520nm LED Green Light – Anti-fatigue:
Improves skin condition, balances the colour tone of the skin, reduces sebum production, relieves mental stress, reduces the incidence of edema (swelling), contributes to the elimination of epidermal pimple spots, slows down melanin production, has an anti-inflammatory effect (especially against acne-prone skin), suitable for all skin types.
590nm LED Yellow Light – against redness, to increase immunity:
Reduces skin roughness and redness, relieves skin diseases, In addition, it relieves fever and increases immunity, promotes the absorption of cosmetic products, helps to improve cellular metabolism, improves detoxifying properties by promoting lymphatic activity, especially effective after intensive mechanical peeling, helps slow down skin aging.
630nm LED Red Light – Anti-wrinkle:
Whitening effects, for soft, wrinkle-free skin, smoothes fine lines, shrinks the pores, improves skin condition, promotes the natural production of collagen, increases the efficiency of absorption of active ingredients in cosmetic products, improves blood circulation in the subcutaneous tissue, prevents the formation of pigment.
LED Purple (pink) light – against acne scars:
Combination of red and blue light = a combination of two treatment therapies, especially effective in treating acne scars.
LED Green-blue light – supports metabolism:
It gradually increases cellular energy and supports metabolism.
LED White Light – Anti-Aging:
It addresses age spots and sagging skin, and reduces the appearance of fine wrinkles.
Strobe mode – automatic light switching:
Not recommended for regular use.

Use:
BEFORE USING THE MASK, TRY ALL CONTROLLER FUNCTIONS WITHOUT THE MASK ON YOUR FACE. Try to avoid direct eye contact with the light coming from the mask.
Before using the mask, check that all functions on the controller are set to the minimum. Too great an intensity of the galvanic mode can have similar manifestations to an electric shock. Also set a lower treatment time (recommended 10 minutes).
Attach a neck mask to the face mask. Use USB cables to connect both LED masks to the controller. Connect the controller to the power cable. The power cord must be plugged into an outlet when using the mask.
Adjust the length of the elastic band to your face and add 7 galvanic electrodes to the mask.
Before applying the mask, cleanse the face and neck thoroughly and then gently dry with a towel.
Start the skin treatment by setting the treatment time (TIME buttons) and then select the desired treatment colour (colour SELECT/START button)
Put the mask on your face and neck and start the whole process of skin treatment with photon therapy.

Package contents:
LED face mask Palsar7 Rosegold, LED neck mask Palsar7 Rosegold, 7× galvanic electrode, controller, 2× USB cable, power adapter, user manual in Czech
Colour:
Old Pink
Power supply:
100-240VAC, 50/60Hz
Tension:
12V (1A)
Warning:
The maximum time for using the mask per day is 45 minutes. If you want to try several treatments in one day, take a break of at least 10 minutes between them. The recommended duration of one treatment is 10-15 minutes. Ideally, use the mask 2-3 times a week. If you suffer from sensitive skin, eczema, allergies or have a cold, consult your doctor before using the mask. Not suitable for children under 14 years of age. Forbidden to use: pregnant women, infants, children, people with colds, strep throat or flu, epileptics, light allergy, patients with thyroid disease. Prohibited for use by people who have felt sick after using the mask. Please see your doctor and consult with him/her about the use of the mask. Do not watch TV, surf the internet, read a book, etc. while wearing a mask. There is a risk of long-term eye damage. Avoid prolonged direct eye contact with the light source. If you intend to use cosmetics along with the mask, choose quality products with natural ingredients. After opening the box, the mask may smell slightly, this is because it is made of medical silicone, the smell will soon disappear. Whether you use the mask on a bed or a lounger, always store it in its box to prevent damage. Do not use water to clean the mask, do not immerse the mask in water. Use a damp cloth to clean it. Do not use any chemicals to clean the mask. Do not expose the mask to direct sunlight.