MEVA Relax PLUS TB15001 + regulator with hose

MEVA Relax PLUS TB15001 + regulator with hose
MEVA Relax PLUS TB15001 is a gas stove combined with electric power supply. The source is a common 10kg PB bottle or 230 V mains electricity, which makes the room heating more efficient thanks to the built-in fan. The stove is equipped with piezoelectric ignition, allowing easy ignition of the gas at the push of a button. By striking the piezoelectric crystal, a spark is created that ignites the gas. For greater safety, they also have a flue gas guard - band a safety device that monitors the ratio of air and flue gas in the heater and in case of an emergency ratio, the gas supply is switched off and the heater is switched off. Although this system is reliable, it is designed for a true emergency, so make sure to provide adequate ventilation according to the instructions. The stove is supplied with accessories for connection to a 10kg PB bottle.

Key features of the MEVA Relax PLUS TB15001 gas stove
- Gas stove combined with electric power for efficient room heating
- Piezoelectric ignition
- Flue gas guard for increased safety
- Supplied with accessories for connection to 10kg PB bottle
- Thermocouple
- Three positions of gas power and two positions of electric voltage power
- Castors for more comfortable handling
- Proven design
Technical parameters:
Performance: LPG 4,2 kW, el. 1.5 kW
Consumption: 305 g/hr
Weight: 14 kg
Designed for connection to 5kg and 10kg propane-butane cylinders
Dimensions (w × h × h): 400 × 410 × 720 mm
Expected endurance - PB bottle 5 kg: 16 h 30 min
Expected endurance - PB bottle 10 kg: 33 h
MEVA Relax PLUS TB15001 can be used with pure propane, the heating capacity is higher by about 15-20% (proportionally, the consumption is also higher). Pure propane is better for stove operation, butane has impurities in it.
Safety Alert:
The aggregate consumes oxygen during operation and is not allowed to be used in unventilated enclosed rooms. The devices are designed for defrosting, drying and tempering rooms in non-residential buildings, in an open or sufficiently ventilated space.
The unit is not intended for permanent heating. The combustion gases remain in the space of the heated room and therefore sufficient ventilation must be provided. The unit must not be used in areas below ground level (cellars, basements, etc. ) Use in these areas is only possible for short periods of time and only if forced ventilation is provided and a safety alarm device is used.
Specifications
energy class
Gas
Location
Performance
Heat capacity
Technical specification
Features
Colour
Dimensions and weight
| Code: | PHT0046 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
MEVA-TEC s.r.o. Chelčického 1228 413 01 Roudnice nad Labem - Bezděkov Tel.: 416 823 181, 188, 173 E-mail: [email protected] MEVA a.s., Na Urbance 632, 413 13 Roudnice nad Labem, Czechy, +420 416 823 350, [email protected]
|