MDT Technologies Power supply KNX with diagnostic function, 6M, 960mA
510.09 €
MDT Technologies Power supply KNX with diagnostic function, 6M, 960mA
The MDT KNX power supply with integrated inductor supplies the KNX bus with a constant stabilized voltage of 30 VDC. An integrated bus coupler with diagnostic function monitors bus voltage, bus current, bus overload and bus fault/fault. All events are stored with a time stamp in the internal circular buffer. The current operating status is indicated by 8 coloured LEDs on the top of the device. Made in Germany and certified according to ISO 9001.
Key features of MDT Technologies KNX power supply switch with diagnostic function
- KNX power supply with integrated choke
- Network voltage 230 VAC
- Short circuit resistance
- Safe against overload
- With output without choke
- Integrated bus coupler with diagnostic function: bus voltage, bus current, bus overload, bus voltage drop/recovery
- All events are stored with a time stamp in a circular buffer
- Reading from circular buffer using 14 byte telegram
- Safety function for detecting a faulty device in a KNX line
- Modular installation device for DIN rails 35 mm
- Integrated bus coupler
Whole description
Specifications
Use
Expandability
Open system
Operation
Standalone
Area of use
Home control
Location
Location
On DIN rail
Technical specification
Number of channels
1
Number of phases
1
Maximum voltage
230 V
Features and functions
Minimum operating temperature
-5 °C
Maximum operating temperature
45 °C
Minimum operating humidity
0 %
Maximum operating humidity
93 %
Safety features
Overload protection
Usage
Usage
Lights
Dimensions
Height
108 mm
Width
90 mm
Depth
64 mm
All parameters
| Code: | MDTT24088 |
| Warranty: | 24 months |