Intel SE7210TP1SCSI Torrey Pines, iE7210, 4x DDR400 ECC, SATA RAID, SCSI, int. VGA, USB, LAN, GLAN,

Available server motherboard designed for Intel Pentium 4 processor socket 478 chipset with the Intel E7210.The plate is an integrated video card ATI Rage XL SVGA with 8 MB of memory and the possibility of further extension is equipped with one PCI slot and three PCI-X 64-bit slots.Desku can be fitted to 4 GB DDR RAM and a 400 hard drive controllers offers two Serial ATA ports with RAID functions 0, 1, four ports UltraDMA 100/66 and jednokanálový Ultra320 SCSI RAID controller with functions 0, 1The network is equipped with two integrated network cards Intel PRO/1000 and Intel PRO/100 +.
The parameters and specifications:
Applicable processors: Intel Pentium 4 socket 478 Support for Hyper-Threading Technology The list of supported processors can be found/ / www.intel.com/support/motherboards/server/se7210tp1-e/sb/cs-008322.htm "> here.
Čipset:
Intel E7210
The system bus:
800 MHz
RAM:
Slots:4 slot for memory modules DDR 266 / 333 / 400
Suitable type of memory:unbuffered ECC or non-ECC modules
Capacity:Each module 128 MB to 1 GB
The maximum amount of memory:up to 4 GB DDR 266 / 333 / 400
Dual channel:two identical memory modules
We recommend memory/ / www.alzasoft.com / SearchAdvanced.asp?EXPS = DDR +% 2Bnon-reg & NameSearch = 1 & CodeSearch = 1 "> Kingston for their excellent reliability and perfect compatibility.Information memory modules tested with this board, visit/ / www.intel.com/support/motherboards/server/se7210tp1-e/sb/cs-008324.htm "> here.
Extension slots:
3rd PCI-X
1st PCI
Controllers discs:
2nd UltraDMA 100/66
2nd Serial ATA with RAID 0, 1
Ultra320 SCSI controller:
1st Adaptec AIC-7901
Support for RAID 0, 1
Integrated video card:
ATI Rage XL SVGA 8 MB
Integrated network card:
Intel PRO/1000
Intel PRO/100 +
Inputs and outputs:
1x serial port (the possibility of adding further to bracketu)
1x VGA D-SUB
1st PS / 2 keyboard
1st PS / 2 mouse
2x USB 2nd0 (the possibility of adding further to bracketu)
2nd RJ45
Power:
ATX and EPS / SSI
Connectors:1st ATX / SSI 20/24 pins, 1x ATX12V/SSI 4 / 8 pins
For the correct functionality is necessary server cabinet with a good source!
The size of plates:
304.8 mm x 243.84 ATX