Intel S875WP1LX Winterpark, i875P, 4x DDR400 ECC, SATA RAID, int. VGA, USB2.0, LAN, GLAN, sc478, ATX

High-quality, cost-benefit server motherboard designed for Intel Pentium 4 processor socket 478 chipset with Intel 875th.The plate is an integrated video card ATI Rage XL SVGA with 8 MB of memory and the possibility of further extension is equipped with three PCI slots.
Desku can be fitted to 4 GB of RAM DDR 400 ECC and the disk controller offers four Serial ATA ports with RAID functions 0, 1, or 10 ports and a pair UltraDMA 100/66.The network is equipped with two Intel integrated network cards.This is the motherboard, which is suitable for smaller and more favourable cenvě server solutions for smaller companies or institutions.Thanks to the use of certified čipsetu is guaranteed long time and maximum stability.In addition, the plate supports all of the available server operating systems.
The parameters and specifications:
Applicable processors: Intel Pentium 4 socket 478 Support for Hyper-Threading Technology The list of supported processors can be found/ / developer.intel.com/support/motherboards/server/s875wp1-e/sb/cs-007236.htm "> here.
Čipset:
Intel 875th
Supporting Performance Acceleration Technology
The system bus:
533 / 800 MHz
RAM:
4 slot for DDR memory modules
Support for DDR 266 / 333 / 400 MHz (max4 GB)
Support unbuffered ECC
RAM:
Slots:4 slot for memory modules DDR 266 / 333 / 400
Suitable type of memory:unbuffered ECC or non-ECC modules
Capacity:Each module 128 MB to 1 GB
The maximum amount of memory:up to 4 GB DDR 266 / 333 / 400
Dual channel:two identical memory modules
We recommend memory/ / www.alzasoft.com / SearchAdvanced.asp?EXPS = DDR +% 2Bnon-reg & NameSearch = 1 & CodeSearch = 1 "> Kingston for their excellent reliability and perfect compatibility.Information memory modules tested with this board, visit/ / developer.intel.com/support/motherboards/server/s875wp1-e/sb/cs-007241.htm "> here.
Extension slots:
3 x PCI
Controllers:
2 x UltraDMA 100/66
4 x Serial ATA with RAID 0, 1 and 10
1 x FDD 1.44 MB, 2.88 MB
Integrated video card:
ATI Rage XL SVGA 8 MB
Integrated network card:
Intel PRO/1000 XT Gigabit
Intel PRO/100 +
Inputs and outputs:
1 x serial port (the possibility of adding further to bracketu)
1 x VGA D-SUB
1 x PS / 2 keyboard
1 x PS / 2 mouse
2 x USB 2nd0 (the possibility of adding further to bracketu)
2 x RJ45
Power:
ATX and EPS / SSI
Connectors:1st ATX / SSI 20/24 pins, 1x ATX12V/SSI 4 / 8 pins
For the correct functionality is necessary server cabinet with a good source!
The size of plates:
304.8 mm x 243.84 ATX