Wilckens German thick layer glaze, Dickschicht Lasur 750 ml, WI.11400000050

15.36 €

Wilckens German thick layer glaze, Dickschicht Lasur 750 ml, WI.11400000050

Wilckens wood stain protects exterior wooden surfaces such as fences, pergolas, cladding, windows and doors. Its solvent-based formula shields wood from UV radiation, water and other weather elements. Correct application creates a satin gloss finish that preserves the natural look of the wood. Following the three-coat process provides long-term protection for up to 5 years.

Key features of Wilckens German high-build transparent wood stain

  • Designed for exterior use on wooden surfaces
  • Suitable for fences, pergolas, cladding, windows and doors
  • Solvent-based formula
  • Provides protection against UV radiation, water and weather elements
  • Creates a satin gloss finish when dry
  • Theoretical coverage of 15m²/L
  • Three coats recommended for optimal protection
  • Drying time of approximately 16 hours before the next coat
  • Pack contains 0.75L of wood stain

Protective properties and composition

The wood stain is based on a special combination of oil and alkyd resins supplemented with waxes. This formula creates a protective film on the wood surface. The coating resists dripping and splashing water while regulating wood moisture and letting the wood breathe naturally. Thanks to the UV filters and pigments, the coating has very good light fastness and slows down wood degradation caused by sunlight.

Application process and coverage

Apply the wood stain to a clean, dry surface free of dust and grease. You can apply it with a standard brush. To achieve optimal results and long-term protection, the manufacturer recommends applying three coats in total. One litre covers approximately 15m² of surface in a single coat. All available shades of this wood stain can also be mixed together to create your own custom colour.

Drying time

Drying speed depends on temperature, humidity and the absorbency of the surface. Under standard conditions (20°C and 65% relative humidity), the surface is dust-dry in 4–5 hours. You can apply the next coat after approximately 16 hours. Complete drying and curing takes about 48 hours, at which point the surface acquires its final properties.

Specifications

Type

Glaze type Thick-coat
Use Exterior
Suitable for Fences, pergolas, cladding, Windows and doors

Colour

Primer Transparent

Technical parameters

Approximate drying time 16 h
Theoretical yield 15 m2/l
Number of recommended coatings 3

Features

Base Solvent-based
Protection from UV light, Water, Weather
Application options brush

Packaging

Volume 0.75 l
Code:  WILlaz028
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

Wilckens FArben GmbH, Schmiederstrasse 10, Gluckstadt D-25348, Německo, +420731737285, [email protected]

Show more

Related categories

Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: Wilckens Dickschicht Lasur vastaglazúr 750 ml, WI.11400000050