Verk Water Hardness Tester TDS/EC

7.39 €

Verk Water Hardness Tester TDS/EC

The TDS/EC pocket meter is a device designed to measure liquid density (TDS), conductivity (EC) and temperature (Temp). The low organic content of the water and thus the low hardness are desirable properties in many areas. Softer water is better absorbed by the organism, has a higher capacity to retain oxygen, increases clarity and thus facilitates photosynthetic processes.
Accurate estimation of temperature, hardness and conductivity of water is therefore important in many fields.
The meter enables fast and accurate determination of the amount of solids dissolved in a liquid. It allows you to indicate the state of water pollution (ppm) and thus its suitability for drinking. The higher the water hardness index (ppm), the greater the potential for harmful effects on the human body.
The meter works using the EC process, i.e. the electrical conductivity of liquids. Minerals such as salts, sodium, calcium, magnesium, etc. increase the conductivity of the liquid, which means higher hardness.

Verk Water Hardness Tester TDS/EC

Key Features of the Verk TDS/EC Water Hardness Tester

  • Universal use
  • Measurement of ppm, µS, temperature
  • Temperature fluctuation °C / °F
  • HOLD memory
  • TDS (Total Dissolved Solids) EC (conductivity of water)
  • TDS reading from 0-9999 ppm
  • EC reading in the range 0-9999 µS/cm (= micro-Siemens/cm)
  • Housing for meter storage

Power:
CR2032 battery (included)

Operating temperature:
0.1-80 °C
Dimensions:
15 × 3 × 1.4 cm (h × w × d)
LCD display dimensions:
2.6 × 1.6 cm
Package contents:
New TDS/EC meter, housing
Applications:
Remove the protective cap (can be used as a water measuring container). Turn on the meter by pressing the ON/OFF button. Dip the tip of the meter into the water so that it does not exceed the dip line. Press the SHIFT button to change the instrument's operating mode and measurement type (TDS - ppm and °C; EC - µs/cm a °C; TDS - ppm and °F; EC - µs/cm and °F ). After approximately 5 seconds, the result stabilizes. To save the result, press the HOLD button when the measurement is complete.

Code:  WSaaa1808
Warranty: 24 months
Manufacturer information

VERK GROUP SIKORSKI SP.K., WYGODY 16, 05-090, PODOLSZYN NOWY, Poland, [email protected]

Show more

Related categories

Chcete doručit zboží do Česka? Prohlédněte si Verk Tester tvrdosti vody TDS/EC
Magyarországra történő kiszállításért tekintse meg ezt a termékoldalt: VERK TDS/EC Vízkeménység mérő