Remmers Holzschutz-Grund impregnation 0,75 l Farblos / Colourless
Remmers Holzschutz-Grund impregnation 0,75 l Farblos / Colourless
Key features of the Remmers Holzschutz-Grund Farblos (colourless) primer, 0.75L
- Solvent-based wood primer with preventive action against blue stain, rot and wood-destroying insects
- Prevents wood-staining fungi (blue stain), wood-destroying fungi (rot) and wood-destroying insects
- Resistant to swelling and regulates moisture
- Good adhesion for subsequent coats
- Designed for exterior wood and wood not in contact with the ground, according to DIN EN 335-1, GK 2 and 3
- Ideal for dimensionally stable wooden components (as a base coat only) – e.g. windows and doors
- Also suitable for semi-dimensionally stable wooden components (as a base coat only) – e.g. shutters, profiled boards, garden houses
- Also for use on non-dimensionally stable wooden components (as a base coat only) – e.g. fences, shelters, wood cladding
- Can also be used as a pre-treatment for glazes, topcoats and oil finishes
- Smells of solvent during application, but is odourless once dry
- Apply with a natural bristle flat brush, not a foam roller
Substrate requirements:
Dimensionally stable wooden components – wood moisture 11–15%
Semi-dimensionally stable and non-dimensionally stable wooden components – wood moisture max. 18%
The substrate must be clean, dust-free and dry.
Preparation:
Thoroughly remove dirt, grease and loose old coatings. Protect surrounding building elements and materials from contact with the product. Follow the generally applicable rules for coating wood and wood materials in exterior areas.
Application:
Mix the material well. Apply in the direction of the grain. Private users – apply with a brush/roller in the direction of the grain. Qualified specialist companies – brush/roller application, automatic and manual dipping, spray tunnel methour With hardwoods such as oak, red cedar, afzelia, redwood, etc., rainfall may cause water-soluble substances to be washed out of the wood – this can lead to staining on light-coloured masonry or plaster. Use the product only on raw wood. Keep children and pets away from treated surfaces until completely dry. Clean tools immediately after application with thinner or brush cleaner. Dispose of cleaning residues in accordance with regulations.
Drying:
Low temperatures, poor air exchange and high air humidity will significantly prolong drying time.
Binder:
Alkyd resin
Density (20°C):
approx. 0.81g/cm³
Consumption:
Softwood – 160ml/m² or 130g/m²
Hardwood – 225ml/m² or 180g/m²
Apply 2–3 coats by brushing/rolling. Apply 1–2 coats by automatic and manual dipping or spray tunnel.
Storage:
Store in well-sealed original containers and out of the reach of children, in a dry, cool place protected from direct sunlight and frost in well-ventilated rooms. Smoking is prohibited in storage areas. Store the biocidal product in a dry and cool place at a temperature not exceeding 40°C.
Please note:
Larger product residues must be disposed of in the original packaging in accordance with the applicable regulations. Only completely empty containers should be sent for recycling. Must not be disposed of with municipal waste. Do not empty into drains. Do not pour down the sink. Waste code 03 02 02 (chlorinated organic wood preservatives).
| Code: | SURdre150 |
| Warranty: | 24 months |
| Manufacturer information |
Remmers s.r.o., Technická 2247, 251 01 Říčany, Česká republika, IČO: 25643011, +420 323 604 877, [email protected] 
|