Remmers HK Lazura 3 in 1 [plus] 20 l, nussbaum / walnut
![Remmers HK Lazura 3 in 1 [plus] 20 l, nussbaum / walnut Main image Remmers HK Lazura 3 in 1 [plus] 20 l, nussbaum / walnut - Glaze - Main image](https://image.alza.cz/products/REMlaz126/REMlaz126.jpg?width=500&height=500)
Remmers HK Lazura 3 in 1 [plus] 20 l, nussbaum / walnut
Remmers HK Lazura 3in1 Plus walnut is a solvent-based glaze designed for protective coatings on exterior wooden surfaces. It combines impregnation, a primer, and a final glaze, eliminating the need for other products. The glaze soaks deep into the wood's structure, providing protection against UV radiation, rot, and mould. Thanks to its thin-layer formula, the natural grain of the material is preserved and the vapour-permeable coating lets the wood breathe. The final surface has a matte finish in a walnut shade.
Key features of Remmers HK Lazura 3in1 Plus walnut
- For protective coatings on exterior wood
- Suitable for fences, pergolas, cladding, windows, and doors
- Combines impregnation, a primer, and a glaze
- Solvent-based formula
- Vapour-permeable coating lets the wood breathe naturally
- Creates a matte surface in a walnut shade after drying
- Two coats recommended
- Drying time before the next coat is approximately 12 hours
- Theoretical coverage of 10m²/L
- Package volume 20L
Application and technical parameters
Before application, the surface must be clean and dry. One litre will treat approximately 10m² in a single coat. However, the actual consumption depends on the absorbency and type of wood. For optimal protection, two coats are recommended. The drying time before applying the next coat is about 12 hours. The entire 20L package is therefore sufficient to treat up to 200m² in a single coat.
Specifications
Type
Colour
Technical parameters
Features
Packaging
| Code: | REMlaz126 |
| Warranty: | 24 months |
| Manufacturer information |
Remmers s.r.o., Technická 2247, 251 01 Říčany, Česká republika, IČO: 25643011, +420 323 604 877, [email protected]
|