PATTEX Repair Special Plastics, Polyurethane adhesive 30g

PATTEX Repair Special Plasty is a special plastic adhesive that creates a mechanically resistant, long-lasting, strong, transparent bond that is resistant to water and vibrations. It is suitable for bonding hard and soft plastics and combinations of these with various other materials, such as rubber, leather, ceramic, wood, metal, textiles, hard and soft PVC, ABS, plexiglass and polycarbonate. Final strength is achieved after 24 hours.

How to use:
The surface must be clean, dry and free from grease. For better adhesion, it is recommended to roughen it. Apply the adhesive evenly and in sufficient quantity to both surfaces to be bonded and allow to air for 5 to 10 minutes. Then, within 1 hour at the latest, press both surfaces together. The strength of the bond depends not on the duration of the pressure (a few seconds is sufficient), but on the force of the pressure. Remove any excess adhesive immediately with a damp cloth. After curing, the material can only be removed mechanically. Close the adhesive container tightly after application.

Weight:
30g
Please note:
Not recommended for bonding PE, PP, PTFE and polystyrene.