MARIMEX Swimming pool with ORLANDO construction including skimmer 3,66 x 0,91m
MARIMEX Swimming pool with ORLANDO construction including skimmer 3,66 x 0,91m
The Orlando pool is the ideal choice for those looking for an easy-to-maintain pool for year-round use. There is no need to dismantle and clean the pool after the swimming season. Just winterise it properly and have it ready for use again when the new season arrives. In this way, you save not only time but also money on water, because more than 80% of the water is left over for use the following year if winterised correctly. This environmentally friendly maintenance also saves nature and your water costs. In addition to easy maintenance, the Orlando pool offers excellent stability and durability thanks to its solid galvanised walls and wide water surface. Preparing the pool for the season is quick and easy - just prepare the site, unroll the mat, unpack the pool and within 120 minutes you can start filling the water. The pool walls are made of steel sheet with anticorrosive treatment, which ensures a long service life. It is also recommended to use a cover after swimming to protect the pool.
Above Ground
Type
With steel wall
Version
8 000 litres
Volume
Without filtration
Filtration
Key features of the swimming pool with MARIMEX ORLANDO construction including skimmer 3,66 × 0,91m
- The Orlando pool is designed for year-round operation and does not require dismantling after the season - just winterize it properly
- More than 80% of the water is retained during winterization, saving costs and saving nature
- Pool installation is quick - you can start filling the water within 120 minutes
- Stable construction and frost-resistant foil ensure a long service life
- Replacing the pool liner is easy and extends the life of the pool
Expansion options for an even better experience
The Orlando pool allows you to connect both cartridge and sand filtration. For easy connection of the filtration, there are passages in the pool wall where you can easily connect the Olympic skimmer and 32 mm (5/4") hoses. For better efficiency and faster filtration, it is recommended to invest in sand filtration to ensure optimal water purity and long-term performance.
Orlando is also suitable for in-ground installation
The Orlando pool can be partially or completely sunk into the ground, which contributes to its aesthetic appearance and comfortable use. It is important to follow all construction guidelines and recommendations to ensure safe and effective embedment. The pool must stand on firm, vegetated ground, not on a load. It is essential to check and remove any high groundwater level at the installation site before starting the installation. It is also necessary to think about the location of the filtration and other accessories, which are important to arrange correctly when recessing.
Proper storage of the Orlando pool
The Orlando pool does not need to be dismantled or cleaned during the winter, it can stay built all year round. However, it needs to be properly winterized to be ready for the next season. At the end of the bathing season, drain the water so that the level drops to about 10 cm below the skimmer and close the return nozzle with a stopper. Then disconnect the filtration and all accessories and apply chemicals to the pool to winterize it. If the hoses cannot be disconnected, lower the water level another 10 cm below the return nozzle and drain the water from the hoses to prevent frost damage. It is strongly recommended not to remove all the water from the pool and not to remove the pool liner from the structure. If you empty the pool, it could be deformed or damaged, which would affect its functionality.
Orlando pool package components
- Orlando pool (steel wall, foil and rails)
- Instructions
- Minor installation material required to build the pool (rails, connectors, etc. )
Technical parameters
- Pool diameter 3,66 m
- Pool height 0,91 m
- Water depth 0.8 m
- Weight 41 kg
- 1 package 91 × 38 × 38 cm
Specifications
Type
Features
Dimensions
Equipment
Filtration
Volume
| Code: | MARBA012 |
| Warranty: | 24 months |
| Manufacturer information |
Marimex CZ s.r.o., Libušská 221/264a, Libuš, 142 00 Praha 4, [email protected] 
|