MARIMEX Pool Chemistry SPA OXI powder 0,5kg

MARIMEX SPA OXI powder is intended for regular oxidation treatment of water in whirlpools. It acts as an effective anti-algae and anti-pollution agent, while oxidizing organic pollution and keeping the water hygienically clean. It is recommended to use in combination with Activator for maximum effect. When dosed regularly, it helps maintain optimal water quality and prevents algae formation.

Brand Marimex

Marimex swimming pool disinfection products are developed, manufactured and packaged in the Czech Republic, while the origin of the raw materials is carefully controlled and the processing process is monitored. For more than 25 years, the company has been making sure that the water in swimming pools is safe and clean. The workmanship and effectiveness of the products is proven not only by experts, but also by many satisfied users. A wide range of chlorine and chlorine-free chemistry provides comprehensive care for pool water throughout the swimming season while effectively preventing algae or turbidity.

Use:
Before the first use of the product it is necessary to adjust the pH value to 6.8-7.2. The preparation has an acidic nature, so it lowers the pH and alkalinity, it is therefore necessary to periodically, at least once a week, to control not only the active oxygen content, but also the pH and alkalinity of the water. Dissolve the dose of the product thoroughly in water in a clean plastic bucket. The product is added to water, not vice versa. Slowly pour the dissolved product directly into the pool or into the skimmer (collector). The filtration equipment must be in operation during and 24 hours after application. During pool operation, it is advisable to add additional amounts of product as needed. If the active oxygen content falls below 8 mg/l, a further dose must be added. Conversely, if the value is higher than 10 mg/l, the dosage should be reduced and the concentration should be allowed to fall to the desired level. At water temperatures above 28 °C, the concentration of active oxygen must be maintained at a minimum of 10 mg/l and shock treatments must be carried out once a week.
Dosage:
For the first water treatment and as a shock measure, dose 20-40 g per 1 m³ of water (25 g is equivalent to approximately 1 tablespoon) approximately every 2 weeks. Regularly, at least once a week, check and maintain the pH value between 6.8 and 7.2 and the active oxygen content between 8 and 10 mg/l.

Notice:
The product is acidic in nature and lowers the pH value and alkalinity of the water, therefore regular monitoring is necessary. It must not be used in concentrated form with other chemical preparations! The filtration device must be in operation during and 24 hours after application.