Intex Cartridge filter 220-240 V
Intex Cartridge filter 220-240 V
To achieve clear crystal water in your pool, try the strongest cartridge filtration from the Intex brand with a flow rate of up to 9,462 l / h. The package contains 2 connecting hoses with a diameter of 38 mm and a length of 1.5 m without fittings, which need to be purchased. The Intex filter cartridge filters out any dirt that gets into it . The built-in timer allows you to set the daily filtering cycle. The switch on the side can be used to turn on continuous operation or turn off filtering completely. For safe operation, a grille is located at the entrance to the suction channel. Filtration is suitable for all Intex pools and its use is only possible up to a water temperature of 35 ° C.
Key features of Intex 28634 cartridge filtration 9.5 m3 / h
- Kartušová filtrace Intex má průtok 9,5 m3/h
- It has a built-in timer for setting the filtration time
- Includes 2 hoses without fittings
- The filter cartridge filters out any trapped dirt
- Intex filtration is suitable for all Intex pools with a water temperature of up to 35 ° C
Easy handling and maintenance of cartridge filtration
Air must not be present in the system for the Intex filter device to function properly. To perform an easy check, open the bleed valve with the unit turned off, wait for all air to escape, and then close again. The drain valve on the side is used for draining at the end of the season. For beautifully clean water, it is necessary to clean and change the cartridge. To do this, open the cover on the top of the pump by turning it slightly. Then remove and clean the Intex cartridge. Complete replacement is recommended once every 4 weeks.
Specifications
Usage
Filtration features
Technical Specifications
Packaging
| Code: | ALLTOHo039 |
| Links: | Producer's Website: |
| Manufacturer information |
Intex trading s.r.o. Benešovská 23, 101 00 Praha 10, Česko www.intexcompany.cz, +420267312645 
|