ELPUMPS Water pump JPV 1500

The ELPUMPS JPV 1500 domestic waterworks meets all the customer's needs for water supply to the house or garden. Quiet motors are the basis for trouble-free operation and long service life. Only such powerful engines have sufficient power reserve to ensure that they never experience overload or overheating that could destroy the engine. Inner and outer parts are made of anti-corrosive materials. The pressure vessel has a capacity of 25 litres and the metal support legs ensure stable positioning. The device can be retrofitted with an efficient 1 l pre-filter.

Possibilities of use

After turning on the tap, the waterworks is connected to a water source, water tank, etc. will switch itself on and push the water to the point of use. A waterworks is suitable for supplying households with drinking or utility water - for example, for irrigation, toilet flushing, taps, washing machines and so on. It can also be used to support the pressure in the water supply network or to pump rainwater from tanks and cisterns.

Techniques

The pump has a self-priming design, i.e. only the pump itself needs to be filled during commissioning. The internal structural elements of the pump are made of special durable plastic, so that they are not at risk of corrosion during prolonged shutdown. The pump casing is made of cast iron. The pump shaft is sealed with a professional double seal, combining spring and ceramic-silicon seals. The motor is specially hermetically sealed against water ingress and protected by a thermal fuse. The machines have an above-average service life because, apart from the mechanical seal, there are no components in the pump body that are subject to abrasion. The pressure vessel is made of thick-walled sheet metal. Inside the container is a rubber lining. This guarantees safety during operation and excellent container tightness over a long period of time. The tank is equipped with a precision pressure gauge for controlling the outlet pressure of the waterworks and a hydraulic control for automatic pump switching.

Technical specifications:
Wattage: 1 500 W
Engine type: 230 V, 50 Hz
Max. pumping power: 6 300 l/hr
Max. temperature of the medium: 35°C
Max. Pressure: 4.8 bar
Max. height: 48 m
Max. suction height: 9 m
Thread diameter: 1″
The cable length: 1 m
Cabling: H07 RNF 3 × 1 mm²
Weight: 15 kg