Den Braven Professional floor dispersion adhesive 5kg PRO 7600

A professional, solvent-free, dispersion-based floor adhesive. It creates a permanently strong and elastic bond. Ready for immediate and easy use, and simple to spread. It has high adhesion to absorbent materials, making it suitable for bonding floor coverings to absorbent substrates. Den Braven PRO 7600 floor adhesive is used for bonding a wide variety of floor surfaces.

Use:
Bonding vinyl planks, carpets (longitudinal fibre), needle-punch carpets (vertical fibre), homogeneous PVC, cork, foam-backed PVC, felt-backed PVC, CV flooring, linoleum, bonding coverings to vertical walls (PVC), on concrete substrates, levelling compounds, mineral substrates, particle boards and cement particle boards. Can also be used on plywood, polystyrene or polyurethane.
Instructions for use:
Apply the adhesive over the entire surface of the substrate using an A1 or A2 trowel for PVC flooring. The laying time is 20 to 50 minutes at +23°C. If the temperature is higher, this time is reduced. If possible, fix and apply weight to the bonded joint. Full curing takes 24–72 hours (depending on the absorbency of the substrate and the thickness of the adhesive). The minimum application temperature is +15°C to +30°C. Adhesive consumption is 250–450g/m² (depending on the absorbency of the substrate and the type of trowel used).