D-c-fix off-white matt, width 67,5 cm

D-c-fix self-adhesive film revives the look of your furniture. It's also suitable for window panes, storage boxes, files, jars, tiles, doors, frames and kitchen units. It is non-toxic, environmentally friendly and lightfast. It contains no heavy metals and the adhesive used is solvent-free. It is also abrasion-resistant. You can stick it on all smooth, dry, and clean surfaces, as well as absorbent surfaces. The D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. You can cut it to size with scissors or a utility knife as needed.

Application:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, it is important to consider the direction of the pattern for films with a wood imitation. You can cut the film with scissors, or for more precision, use a utility knife with a metal straightedge. For larger areas, it is advisable to moisten the surface with a water sprayer. This does not apply to mirror self-adhesive films, chalkboard films, metallic-imitation wallpapers and velour wallpapers. Water is ideal for window films and wood-imitation films. Peel off about 10cm of the backing paper and apply the adhesive side to the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push out any bubbles to the side. If the film wrinkles or warps, carefully peel it back, stretch it to correct it, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few minutes to tens of minutes. After a few hours, the adhesive will bond firmly and correction is no longer possible. When covering larger areas that require joining, an overlap of 5–10mm is recommended. Let the wallpaper overhang at the edges and trim it at the end. When applying to edges, bends or folds, you can use a hot air gun, which will soften the wallpaper and allow it to bend and stretch. You need to work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.