D-c-fix retro white and blue mosaic

D-c-fix retro white and blue mosaic
D-c-fix self-adhesive film revives the look of your furniture. It's also suitable for window panes, storage boxes, binders, jars, tiles, doors, door frames and kitchen units. It is non-toxic, environmentally friendly and lightfast. It contains no heavy metals and the adhesive used is solvent-free. It's also resistant to abrasion. You can stick it on all smooth, dry, and clean surfaces, including absorbent ones. The D-c-fix film has an integrated self-adhesive layer, which makes it easy to apply. Use scissors or a utility knife to cut it to your desired size.
Key features of the D-c-fix retro white and blue mosaic self-adhesive film
- Self-adhesive film to revive the look of your furniture
- Also suitable for window panes, storage boxes, binders, jars, tiles, doors, door frames and kitchen units
- Non-toxic, environmentally friendly and lightfast
- Resistant to abrasion
- The D-c-fix self-adhesive film can be applied to all smooth, dry, and clean surfaces, including absorbent ones
- Features an integrated self-adhesive layer for easy application
Application:
Clean and degrease the surface. Clean window panes with an alcohol-based cleaner and let them dry. Clean furniture and laminate with a damp cloth. First, carefully measure everything dry, it is important to consider the direction of the pattern for films with a wood imitation. You can cut the film with scissors, or for more precision, use a utility knife with a metal straight edge. When covering larger areas, it is a good idea to moisten the surface with a water sprayer. This does not apply to mirror self-adhesive films, blackboard films, metallic-effect wallpapers and velour wallpapers. Water is ideal for window films and wood-imitation films. Peel off about 10cm of the backing paper and place the adhesive side onto the surface. Slowly and gradually pull off the backing paper while smoothing the film with a squeegee or sponge. Push out any bubbles to the side. If the film wrinkles or becomes crooked, carefully peel it back, straighten it by pulling it taut, and reapply. The film has a so-called “bonding timer”, which means you can only make corrections by peeling it off within a few to several dozen minutes. After a few hours, the adhesive bonds firmly and correction is no longer possible. When covering larger areas that need joining, an overlap of 5–10mm is recommended. Let the wallpaper overhang at the edges and trim it at the very end. When applying to edges, bends, or folds, you can use a hot air gun, which will soften the wallpaper and allow it to bend and stretch. You must work carefully to avoid irreversible damage to the film. You can also use a squeegee for smoothing.
Specifications
Specifications
Features
Dimensions
Area
| Code: | DCFsaf036 |
| Warranty: | 24 months |
| Manufacturer information |
Konrad Hornschuch AG Salinenstraße 1 74679 Weißbach Deutschland, www.dcfix.de
|