Allnature Pool Cleaner 1000 g

Allnature Eco Pool Cleaner removes brown stains caused by iron and manganese naturally through 100% natural ascorbic acid (vitamin C). It is suitable for easy pool maintenance and guarantees clean and clear water.

Active ingredients:
Ascorbic acid (vitamin C) - removes brown stains caused by iron and manganese from the pool
Use:
Before application: Remove algae and organic deposits in an appropriate manner. If your pool has a heater, turn it off and disconnect it from circulation. Reduce the amount of chlorine in the pool to 1 mg/l or less (the less the better). Adjust the pH to 7.2 (7.0 to 7.4).
App: Switch on the circulation pump (filtration). Sprinkle the powder slowly into the pool, especially in areas of brown spots (pool edges, steps, etc. ) in the amount of 250-500 g per 10 m3, depending on the degree of pollution. Scatter the undissolved crystals over the surface, e.g. with a brush. Allow the water to circulate for at least 1 hour. Then add another dose if necessary and allow the water to circulate for at least 24 hours. Clean the filtration (e.g. backwash) to remove trapped metals.
After application: Adjust the pH to an optimum value of 7.2 to 7.6, slowly adding chlorine to your desired mg/l. You can add a suitable antimetal deposit agent. Do not apply chlorine shock for at least 4 more days.
Tip: Brown stains caused by iron that are above the water surface or around the perimeter of the pool can be cleaned directly. Put a small amount of powder in a wet cloth, remove the stain and rinse.
First Aid:
In contact with the mucous membranes of the eyes: Flush with a stream of water and then seek medical attention.
In case of eye contact: Rinse cautiously with water for several minutes. Remove the contact lenses, if fitted, and if they can be removed easily, continue rinsing.
If eye irritation persists: Seek medical attention/treatment.
Storage:
Store in a cool, dry place (between 5 and 25 °C).
Note:
Keep out of reach of children. Keep the container tightly closed.