Processor Cooler Zerotherm BTF92 Oveclocking Edition

Very effective cooler designed for the entire range of Intel and AMD.Heat is removed from the copper base with heatpipe tubes to 6 ribs, which is attached to the fan with dimensions of 92 x 92 x 25 mm with adjustable speed from 1000 to 2300 revolutions per minute.Size and low fan speed ensures the low noise cooling.Cooler is able uchladit heat loss up to 150W.

Heatpipe technology is based on the closed tube, where the "warm" end is a liquid with low boiling point, which is beginning to evaporate by heating in the gas phase rises to the "cold" end where it condenses on the walls and the tube is returned in a liquid state back .When heating the liquid, the waste heat from the chip is used to change state and then in the form of hot steam goes to the opposite end, which must be cooled to a temperature at which vapor condenses.Compared to classical convention has therefore higher efficiency heatpipe technology, heat transfer, but only if sufficient temperature difference between the two ends of the tube and its correct orientation.

Parameters and specifications:

Socket:
Intel:LGA775 - all models for this slot
AMD:939/940/AM2 - All models for this slot

Material:
Base:Copper
Heat pipe:Copper
Cooling Pads:Copper

Dimensions:
\r
108 x 81 x 128 mm

Fan:
Two blue LED backlit
92 x 92 x 25 mm
12px; font-family:Arial, Helvetica, sans-serif "> 1.000 ~ 2.300 rev/m.

Noise
17 ~ 37th2 db

Weight:
\r
Whole description