ERRECOM foam cleaner for evaporator and air conditioning vents, spray 100 ml
ERRECOM foam cleaner for evaporator and air conditioning vents, spray 100 ml
The foam cleaner is a great helper for cleaning vehicle evaporators and ventilation ducts and interior air conditioners. It is suitable for cleaning "mobile air conditioners", "Split" air conditioners, car air conditioners and "Fan Coil" air conditioners. The active foam lasts longer than a standard spray and is dispersed in the ventilation circuit by means of a fan. It is applied directly to the evaporator, either through the fan or through the ventilation vents, using the included cross-diffuser tube. It leaves no residue.
Key features ERRECOM foam cleaner for evaporator and air conditioning vents, spray 100 ml
- Sufficient to treat up to 4 vehicles, recommended to use once every 6 months
- Simple and quick application without the use of specific tools (less than 15 min), ideal for the treatment of used cars
- Use within 24 months of the date of manufacture stated on the aerosol
- Do not throw the spray freely, only empty sprays should be put in the waste
Instructions for use AUTO
- Switch off the engine and air conditioning
- Remove the cabin filter
- Apply some of the spray directly to the evaporator via the hose
- Apply the same amount of spray to the ventilation ducts from the interior of the vehicle
- Leave on for 20 minutes
- Insert new cabin filter
- After using the product, ventilate thoroughly
Instructions for use for split and mobile air conditioners
- Remove the dust and HEPA filters (if included) and switch off the air conditioner
- Shake the foam thoroughly before use and then apply it directly to the air conditioner evaporator
- Apply a reasonable amount of foam, after application, allow the air conditioner to run at maximum power for at least 10 minutes to allow the product to fully absorb and evaporate
- Wipe off any excess foam with a soft cloth
- After using the product, ventilate thoroughly
- The content of 100 ml is sufficient to treat 1 unit
Instructions for use for air conditioning fan coil
- Remove the filter
- Shake the foam thoroughly before use and then apply it directly to the air conditioner
- Apply a reasonable amount of foam, after application, allow the air conditioner to run at maximum power for at least 10 minutes to allow the product to fully absorb and evaporate
- Once the process is complete, ventilate the room thoroughly
- After using the product, ventilate thoroughly
- The content of 100 ml is sufficient to treat 1 unit
Safety instructions
Pressure vessel. Protect from sunlight and do not expose to temperatures above 50°C. Do not pierce, do not throw into fire, even after use. Do not spray on flames or hot bodies. Use and store away from flame, heat source, electrical appliance on. Don't smoke. After using the product, ventilate thoroughly. Use the product only for the purpose for which it is intended.
| Code: | AUPR123360 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ACI Auto Components International s.r.o.,Podnikatelská 549, 190 11 Praha 9 - Běchovice, [email protected], www.aci.cz 
|