The ELÍZ EURO 120 X water pressure heater with a capacity of 120 liters is suitable for one or more supply points. Designed for horizontal wall mounting. The water outlets are on the left. ELIZ water heaters excel not only in their functionality, efficiency and quality of treatment, but also in their energy efficiency and high performance. They meet the demanding criteria of the directive on the efficiency and energy consumption of water heating devices.
The heater tank is made of high quality steel protected with zirconium enamel. High-quality polyurethane insulation without CFC thickness of 33 mm guarantees low heat losses and savings in water heating costs. Using the thermostat located on the control panel, you can set the water temperature in the range of 7-75 ° C, with the option of setting the ECO mode. When set in ECO mode, the water is heated to an optimal temperature of 55 ° C, with reduced heat losses and lower power consumption. The minimum value of the thermostat serves as a protection against freezing of water in the heater.
The heater has built-in 2 anode rods, which guarantees effective protection of the tank against corrosion and significantly prolongs its service life. The switch with the heating light is used to turn the heater on / off in the event of our absence, which allows us to save energy.
Additional information:
Tension:
230 V
Fighting:
10 A
Electrical protection:
IP 24
Water heating time from 12 ° C to 65 ° C:
3.8 h
Heat losses:
1.35 kWh / 24 h
Energy efficiency class:
D
Insulation thickness:
33 mm
Water connection:
G 1/2 ''
Maximum water pressure:
6 bar
Weight:
33.5 kg
Product dimensions: H × W × D
1 170 × 462 mm
| Code: | ELBO046 |
| Product Number: | 3310 |
| Links: | Producer's Website: |