EKO MB Recycled PETG 1.75mm 1kg Milky White

The EKO MB filament will serve as a refill for 3D printers. The filament has optimal parameters for the exact shaping of every minute detail. You are sure to appreciate its long endurance and the absence of the unpleasant smell typical of such filaments. The White colour of this 3D printer filament will stay the same for a long time after the printing process. Its weight is about 1 kg. The elasticity value of the EKO MB Recycled PETG 1.75mm 1kg Milky White equals 4 - high. The nozzle temperature may reach up to 245 °C during the 3D printing process, and the temperature of the pad should be set to 90 °C. The EKO MB filament is made out of PETG. This is an improved version of PET. It has modified glycol, so it is not so fragile. The diameter of the filament is 1,75 mm. The diameter's tolerance is 0,05 mm.

EKO MB Recycled PETG 1.75mm 1kg Milky White Filament Key Features

• Recommend printing speeds using this filament are from 40 to 60 mm/s
• White printing filament from EKO MB for 3D printers
• Temperature resistance of the filament by EKO MB: 5 - highest
• Filament strand length: 345 m
• Made out of PETG
• Properties of this material: rPETG
• No unpleasant smell and low bubble formation
• Diameter of 1,75 mm is ideal for the printing of smaller, light objects
• Weight of pack: 1 kg