Edimax ET-913SC1+

Media Converter Edimax EW-913SC1 + is the best solution for converting optical fiber and copper connections to ensure high speed Gigabit Ethernet.With this converter you can use the data transfer up to 10 km long single-mode fiber optic cable and then convert it to metallic UTP connection from terminal.
Edimax EW-913SC1 + is fully compatible with the IEEE 802 standards3ab 1000 Base-T and 802nd3z 1000 Base-LX.The converter will find the body of an RJ-45 port for connection to 1000 Base-T devices, such as computer or switch, and an optical connector for connection to 1000 Base-LX connectivity possessing the device.
The device provides monitoring functions by LED indications.Fiber Link Alarm allows effectively monitor and maintain critical optical connections more efficiently.Integrated voltage supervisor IC, it automatically resets all chipsets in converter when the voltage drops below 2.9 V, which ensures correct operation of the optical and TP port in a storm or unstable power fluctuations.Plug and Play will sign it makes it that to install just plug the cables into the connectors and you can start using broadband.
Specifications:

Basic:
Type:Media Converter
Wavelength:1310 nm
Network protocol and connector 1:GigabitEthernet 1000BaseLX - SC
Network protocol plug and 2:GigabitEthernet 1000BaseT - RJ-45
Cabling:
Single-mode (single mode) fiber optic cable
UTP - unshielded twisted four-pair
For more information:
Port automatically crosses the cables, if necessary (MDI/MDI-X)
Duplex mode and speed can be set manually or automatically
Be connected to a 19 "chassis ET-910MCR (12 open slots, redundant power supply)
Supplied with external power adapter 5V DC/1.6 A, max
Max.length of optical fiber:10 km
Automatic reset if the voltage drops - voltage supervisor
Store and forward switching packet transmission

Design:
Dimensions:26 x 71 x 94 mm (H x W x D)
Weight:0.6 kg