EATON UPS 93PS 10kW (3 or 1)/1phase

The Eaton UPS 93PS three-phase uninterruptible power supply with a 10kW output protects critical applications in data centres and industrial environments. As an online double-conversion UPS, it continuously filters input power anomalies and supplies a stable, clean sine wave to the output with zero transfer time. With a 1:1 power ratio, it provides a real power of 10000W and an apparent power of 10000VA. The integrated battery string (9Ah) powers connected devices for 20 minutes at half load. The total operating efficiency is 96%, but in Energy Saver System (ESS) or eco mode, this increases to up to 99%, reducing both operating costs and heat loss. The Tower design, measuring 950 × 335 × 750mm and weighing 188kg, requires a solid floor and sufficient handling space.

Performance, advanced management and monitoring

This power supply is based on an online double-conversion topology, which constantly regenerates the input voltage and sends a clean sine wave to the output without any fluctuations. The transfer time during a power outage is zero, so connected devices experience no interruption. The real power of 10000W corresponds to the apparent power of 10000VA. The total operating efficiency reaches 96%. To further reduce energy demands and heat loss, you can activate the Energy Saver System (ESS) or eco mode, where efficiency increases to up to 99%. A large 5" touchscreen display provides clear control and monitoring of operating states. The software also includes a function for the automatic and controlled shutdown of connected servers and systems in the event of a prolonged power failure, protecting data from loss.

Battery system of the Eaton UPS 93PS 10kW 3/3-phase uninterruptible power supply

The integrated battery system, consisting of a single string of 9Ah batteries, provides backup for 7 minutes at full power load. At half load, the backup time extends to 20 minutes. Advanced Battery Management (ABM) technology extends battery life by optimising charging cycles. The batteries are not user-replaceable. For longer backup times, the system can be expanded with external battery modules via a hardwired connection. The cold start function starts the UPS even without an input power supply.