Thermalright HR-07

Executive passive radiator with HeatPipe technology designed for the type of DDR memory and DDR2.HeatPipe Cooler has two tubes, which pay for heat in two successive independent žebrovaných aluminium radiators.In the event of an increase in the effects of cooling is possible to install an active fan (not included) with dimensions of 70, 80 or 92 mm.The radiator is very easy to install memory module, is to do no tools needed.
HeatPipe technology is based on the principle of closed-tube, which in its "ohřívaném" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "chilled" the end where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention offers the technologies HeatPipe higher efficiency of transmission of heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.
The parameters and specifications:
Supported modules: DDR, DDR2
Supported fans:
70, 80, 92 mm
HeatPipe:
The number of tubes:2
Shape:U
Dimensions:
150 x 27 x 86 mm
Weight:
150 g