AXAGON HMC-GL3A SuperSpeed hub, USB-C 5Gbps -> 3x USB-A & RJ-45 GLAN, metal
Price Guarantee
AXAGON HMC-GL3A SuperSpeed hub, USB-C 5Gbps -> 3x USB-A & RJ-45 GLAN, metal
The slim, metal, USB-C 3.2 Gen 1 (USB 3.0) multiport AXAGON HMC-GL3A hub not only connects up to three USB devices to your laptop or computer simultaneously, but also adds a gigabit network card to connect your computer to a high-speed network. The metal body of the hub is made of aluminium, providing perfect mechanical protection for frequent carrying. The elegant, finely textured surface prevents unwanted fingerprints. The fixed 20cm USB cable is ideal for users of mobile devices. This compact multiport hub can also handle the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface, the transfer speed is up to 5Gb/s. The network card extends your computer with a fast and stable network connection, adding a missing RJ-45 network connector or an additional network card. The LAN adapter is compatible with 10/100/1000Mbit/s speeds and also offers a wide range of features, e.g. IPv4/IPv6 checksum to reduce CPU load with checksums, crossover detection and auto-correction, support for various Wake-on-LAN modes, VLAN operation, or advanced Power Management features. In modern operating systems from Windows 8.1 and higher, the adapter allows for easy automatic installation without needing an internet connection. The port replicator is the ideal accessory for ultrabooks with a small number of USB-A ports and no network card. The hub is not afraid to connect to phones with a USB-C connector. You can connect a flash drive, keyboard, and mouse to your phone or tablet. Some Android phones and tablets, such as the Samsung S9+, can be connected to the internet with a network cable thanks to the hub.
Key Features of the AXAGON HMC-GL3A SuperSpeed hub, USB-C 5Gbps -> 3× USB-A & RJ-45 GLAN, metal docking station
- Devices can be connected on the fly thanks to Hot Plug support
- Full Plug and Play support
- Sleep mode support
- High-quality shielded cable guarantees high communication speed and minimal unwanted interference
- USB bus power support
- USB cable length 20cm
Supported operating systems
The AXAGON HMC-GL3A docking station supports MS Windows XP/Vista/7/8/8.1/10/11 and later, Windows Server 2003/2008/2012/2016 and later (all 32- and 64-bit versions of Windows OS are supported), Mac OS X 10.4x and higher, Linux with kernel 2.6.x and higher, most versions of Android (check with your Android device manufacturer to see if Ethernet connection is supported).
Package contents:
SuperSpeed USB-C multiport hub with a fixed 20cm cable, multilingual manual
Input:
1× USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector, backwards compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1, USB-C male connector located on a fixed 20cm cable
USB outputs:
3× SuperSpeed USB port, USB-A female connectors, support for 5,000 / 480 / 12 / 1.5Mb/s transfer rates (SuperSpeed / High / Full / Low speed), total throughput / transfer rate is determined by the USB 3.2 Gen 1 interface used (theoretically 5Gbit/s), the USB hub can handle the connection of several external drives simultaneously
RJ-45 output:
Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported Ethernet interface transfer rates 10/100/1,000Mb/s. Supported specifications IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T. 10/100/1,000Mb/s auto-detection. Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU load including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 checksum checking and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet)–reduction of consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX–crossover detection and auto-correction eliminates the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports pair swap/polarity/skew correction.
Wake-on-LAN function in different modes:
The adapter supports advanced power management to reduce losses at idle or light network traffic. It also supports advanced power saving when the Ethernet cable is disconnected. Supports Advanced Configuration Power management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports Microsoft Always On Always Connected (AOAC). Supports Intel Converged Platform Power Management (CPPM). Supports Link Power Management (LPM). Supports Operating System-directed Power Management (OSPM). Supports IEEE 802.3az EEE (Energy Efficient Ethernet).
Specifications
Type
LAN parameters
Features
Laptop power port
Most common ports
Data ports - Number and standards
Power ports for electrical devices
Network ports
Features
Compatibility
Dimensions and weight
| Code: | AG307a |
| Warranty: | 36 months |
| Links: | Producer's Website: |