Sharks Super power IGBT 190A
Don't like the alternatives?
Choose from the full offer
Sharks Super power IGBT 190A
Equip yourself with this practical and efficient Sharks Super power IGBT 190A welding inverter, with which you can quickly weld everything you need in the workshop or garage. This is the second model in this series, which has the SUPER POWER function, which allows you to increase the normal welding current (20-40 A) for a short time to a maximum power of up to 190 A. The Sharks Super power welder is equipped with advanced functions such as ARC FORCE, ANTI STICK and HOT START. The safety function VRD ensures a low voltage on the electrode in the idle state (approx. 15 V), only when the electrode touches the material will the voltage increase. The welder is easy to move thanks to its low weight and built-in handle.
Key features of the Sharks Super power IGBT 190A welder
- Welding inverter with the possibility of briefly increasing the current up to 190 A
- ARC FORCE, ANTI STICK and HOT START functions
- Sharks Super power IGBT 190A has compact dimensions
- Rated welding current in the range of 20 - 40 A
- Welding electrodes with a diameter of 1.6 - 5 mm can be used
- The Sharks Super power IGBT 190A inverter has a VRD safety function
- Low weight and built-in handle for easy carrying
Sharks Super power IGBT 190A has practical functions
To make the work with the Sharks Super power IGBT 190A inverter easy for you, this frame is equipped with a lot of useful technologies that will make everything easier for you. The Arc Force function can stabilize the burning electric arc by automatically regulating the current so that the electrode does not stick. However, if the electrode sticks, the Anti Stick function will reduce the welding current to a minimum and you can then easily tear off the electrode. Last but not least, there is the helpful Hot Start function, which increases the starting current by up to 30% (compared to the set value), which facilitates the ignition of the arc. After successful ignition, the current is automatically reduced to the selected value.
Overall dimensions:
300 × 140 × 210 mm
Weight:
4 kg
Output voltage at load:
60 V
Rated welding current:
20 - 140 A
Protection class:
IP21S
Efficiency:
85%
Package contents:
Sharks Super power welder
Power cable 2 m
Welding cable 2 m with electrode holder 300 A
Cable 2 m with earth terminal 300 A
Mask
Brush / hammer
Specifications
Features
Dimensions and weight
Technical parameters
Packaging
| Code: | SHR1912 |