QUATROS QS14138 Cylinder honing jig, range 51-177 mm

The tool is used for manual honing of cylinders with a drill or in a lathe. The force of the pressure of the arms on the cylinder wall can be corrected by adjusting the spring preload (pressure) with a hand nut on the shaft.

The product can be used for grinding cylinders with an internal diameter of 51 to 177 mm. Each of the three arms is equipped with an interchangeable honing stone with a length of 75 mm.

Technical parameters Tools for auto mechanics QUATROS

• For diameter cylinders: 51 - 177 mm
• Number of arms: 3
• Adjustable pressure: yes
• Length of the grinding stone: 75 mm
• Maximum speed: 2400 rpm. / min.