MANIAC - ultra-fast ceramic wax 500ml for Car detailing

MANIAC Ceramic Ultra Speed Wax for car detailing is a spray-on sealant wax containing superhydrophobic SiO2 ceramic polymers that bond to the surface to create a self-cleaning protective shield. It instantly bonds to the paintwork, repelling dirt, water, and UV rays, and its incredible water-repellent properties keep the car cleaner for longer. Its effect can last for up to four months if the vehicle was decontaminated beforehand, depending on weather conditions and the detergents used during washing. It leaves a wet look and a deep gloss that enhances the paint's colour and gives it a smooth-to-the-touch finish.

High hydrophobicity and self-cleaning effect

Ceramic Ultra Speed Wax creates a high water beading effect. Water droplets form a perfect circular shape on the surface because they have a smaller contact angle; this smaller size makes them lighter and allows them to slide off the surface easily. What's more, the water droplets capture dirt particles that, thanks to the Ceramic Ultra Speed Wax protection, do not adhere firmly to the surface. As they slide off, they create a self-cleaning effect that makes subsequent cleaning easier.

Instructions for use:
You will need one short-pile microfibre cloth to apply the product and one long-pile cloth to finish. Apply the product to the microfibre cloth for a more localised application. Use a dry, clean, short-pile microfibre cloth to spread the product evenly over the area you wish to protect, using vertical and horizontal movements. For finishing, known as “buffing”, use a long-pile, soft, and clean microfibre cloth to complete the application, remove any excess, and polish the surface.
Work panel by panel, on an area no larger than A3 format at a time. You can apply Ceramic Ultra Speed Wax at any time, as it layers and bonds to the protective layer underneath. This means it can be used whenever you want to restore protection and the WOW effect. To finish the treated surface and remove any excess product, it is recommended to wipe the bodywork with a long-pile, soft, dry, and clean microfibre cloth.
Durability:
5 years from the date of manufacture (see packaging).
Recommendations:
For a longer lifespan and better product performance, decontaminate the car to ensure maximum adhesion of the polymers.
To prevent the shampoo from drying out and causing spots, wash the car in the shade and never in direct sunlight.
If the vehicle has been in the sun or the bonnet is very hot, cool the surface with a stream of cold water.
Start from the top – it's the least dirty part, so you'll avoid getting your mitt dirty, and the wash will be quicker.
Try using two buckets – put your water and shampoo solution in the first one, and just water in the second for frequently rinsing your sponge or mitt: this will prevent scratching the bodywork.
Wash in small sections – you won't miss any spots, and the product will be able to work as well as possible without drying out, helping you avoid spots and streaks.
Perfect circles – use a brush to clean the rims, which can get into even the most hidden places.

Warning:
H318: Causes serious eye damage.
H317: May cause an allergic skin reaction.
H412: Harmful to aquatic life with long-lasting effects.
P102: Keep out of reach of children.
P273: Avoid release to the environment.
P280: Wear protective gloves and eye protection.
P302+P352: IF ON SKIN: Wash with plenty of water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313: If eye irritation persists, get medical advice/attention.
P501: Dispose of contents/container in accordance with local, regional, national, or international regulations.