Jump Leads 1200A/6m
Show alternatives
Product accessories
Don't like the alternatives?
Choose from the full offer
Jump Leads 1200A/6m
Forgotten lights or frosty wounds that will absolutely suck your car? In such an unpleasant case it is good to have starter cables in the trunk. These well-crafted 6 m long cables are made of copper core technology and have non-hardening insulation, so even after a long time, handling will be pleasant. Overall, the precision design with metal pliers allows a current load of up to 1 200 A!
Key features
- Quality starter cables
- Non-hardening insulation
- Sufficient length
- High current load
How to do it?
- On a discharged battery, connect the red cable to the positive pole (+) and connect the other end to the positive pole (+) of the starter car (ie the charged battery - the vehicle must be started!)
- Connect the black cable to the negative (-) charged battery pole and connect the other end of the black cable to the negative terminal (-) of the discharged battery.
- We leave this connection for at least 10 minutes with the engine started, when the discharged battery is partially charged.
- We start the second car with a discharged battery and disconnect the starter cables in the reverse order we plugged them in.
Whole description
Specifications
Lead properties
Conductor material
Copper alloy
Cable length
6 m
Conductor material
6.6 mm
Conductor cross section
35 mm2
Max. current load
1,200 A
Clamp properties
Clamp Type
no insulation
| Code: | AUPR4211 |
| Manufacturer information |
VAPOL CZ s.r.o., Zašová 270, 756 51 Zašová, [email protected] 
|